Abstract: We here present the Forward Planning Situated Protocol (FPSP), for scalable, energy efficient and fault tolerant data propagation in situated wireless sensor networks. To deal with the increased complexity of such deeply networked sensor systems, instead of emphasizing on a particular aspect of the services provided, i.e. either for low-energy periodic, or low-latency event-driven, or high-success query-based sensing, FPSP uses two novel mechanisms that allow the network operator to adjust the performance of the protocol in terms of energy, latency and success rate on a per-task basis. We emphasize on distributedness, direct or indirect interactions among relatively simple agents, flexibility and robustness.
The protocol operates by employing a series of plan & forward phases through which devices self-organize into forwarding groups that propagate data over discovered paths. FPSP performs a limited number of long range, high power data transmissions to collect information regarding the neighboring devices. The acquired information, allows to plan a (parameterizable long by {\"e}) sequence of short range, low power transmissions between nearby particles, based on certain optimization criteria. All particles that decide to respond (based on local criteria) to these long range transmissions enter the forwarding phase during which information is propagated via the acquired plan. Clearly, the duration of the forwarding phases is characterized by the parameter {\"e}, the transmission medium and the processing speed of the devices. In fact the parameter {\"e} provides a mechanism to adjust the protocol performance in terms of the latency--energy trade-off. By reducing {\"e} the latency is reduced at the cost of spending extra energy, while by increasing {\"e}, the energy dissipation is reduced but the latency is increased.
To control the success rate--energy trade-off, particles react locally on environment and context changes by using a set of rules that are based on response thresholds that relate individual-level plasticity with network-level resiliency, motivated by the nature-inspired method for dividing labor, a metaphor of social insect behavior for solving problems [1]. Each particle has an individual response threshold {\`E} that is related to the "local" density (as observed by the particle, [2]); particles engage in propagation of events when the level of the task-associated stimuli exceeds their thresholds. Let s be the intensity of a stimulus associated with a particular sensing task, set by the human authorities. We adopt the response function T{\`e}(s) = snover sn + {\`e}n, the probability of performing the task as a function of s, where n > 1 determines the steepness of the threshold. Thus, when {\`e} is small (i.e. the network is sparse) then the response probability increases; when s increases (i.e. for critical sensing tasks) the response probability increases as well.
This role-based approach where a selective number of devices do the high cost planning and the rest of the network operates in a low cost state leads to systems that have increased energy efficiency and high fault-tolerance since these long range planning phases allow to bypass obstacles (where no sensors are available) or faulty sensors (that have been disabled due to power failure or other natural events).
Abstract: We study the problem of data propagation in sensor networks,
comprised of a large number of very small and low-cost nodes,
capable of sensing, communicating and computing. The distributed
co-operation of such nodes may lead to the accomplishment of large
sensing tasks, having useful applications in practice. We present
a new protocol for data propagation towards a control center
(``sink") that avoids flooding by probabilistically favoring
certain (``close to optimal") data transmissions.
This protocol is very simple to implement in sensor devices
and operates under total absence
of co-ordination between sensors. We consider a network model of randomly deployed sensors of sufficient density.
As shown by a geometry analysis,
the protocol is correct, since it always propagates data
to the sink, under ideal network conditions (no failures). Using
stochastic processes, we show that the protocol is very energy efficient. Also, when part of the network is inoperative, the
protocol manages to propagate data very close to the sink, thus in
this sense it is robust. We finally present and discuss
large-scale experimental findings validating the analytical
results.
Abstract: We study the problem of data propagation in sensor networks,
comprised of a large number of very small and low-cost nodes,
capable of sensing, communicating and computing. The distributed
co-operation of such nodes may lead to the accomplishment of large
sensing tasks, having useful applications in practice. We present a new protocol for data propagation towards a control center ("sink") that avoids flooding by probabilistically favoring certain ("close to optimal") data transmissions. Motivated by certain applications and also as a starting point for a rigorous analysis, we study here lattice-shaped sensor networks. We however show that this lattice shape emerges even in randomly deployed sensor networks of sufficient sensor density. Our work is inspired and builds upon the directed diffusion paradigm.
This protocol is very simple to implement in sensor devices, uses only local information and operates under total absence of co-ordination between sensors. We consider a network model of randomly deployed sensors of sufficient density. As shown by a geometry analysis, the protocol is correct, since it always propagates data to the sink, under ideal network conditions (no failures). Using stochastic processes, we show that the protocol is very energy efficient. Also, when part of the network is inoperative, the protocol manages to propagate data very close to the sink, thus in this sense it is robust. We finally present and discuss large-scale experimental findings validating the analytical results.
Abstract: A new model for intrusion and its propagation through various attack
schemes in networks is considered. The model is characterized by the number of
network nodes n, and two parameters f and g. Parameter f represents the probability
of failure of an attack to a node and is a gross measure of the level of security of
the attacked system and perhaps of the intruder˘s skills; g represents a limit on
the number of attacks that the intrusion software can ever try, due to the danger
of being discovered, when it issues them from a particular (broken) network node.
The success of the attack scheme is characterized by two factors: the number of
nodes captured (the spread factor) and the number of virtual links that a defense
mechanism has to trace from any node where the attack is active to the origin of
the intrusion (the traceability factor). The goal of an intruder is to maximize both
factors. In our model we present four different ways (attack schemes) by which an
intruder can organize his attacks. Using analytic and experimental methods, we first
show that for any 0 < f < 1, there exists a constant g for which any of our attack
schemes can achieve a {\`E}(n) spread and traceability factor with high probability,
given sufficient propagation time. We also show for three of our attack schemes
that the spread and the traceability factors are, with high probability, linearly related
during the whole duration of the attack propagation. This implies that it will not be
easy for a detection mechanism to trace the origin of the intrusion, since it will have
to trace a number of links proportional to the nodes captured.
Abstract: A new model for intrusion and its propagation through various attack
schemes in networks is considered. The model is characterized by the number of
network nodes n, and two parameters f and g. Parameter f represents the probability
of failure of an attack to a node and is a gross measure of the level of security of
the attacked system and perhaps of the intruder˘s skills; g represents a limit on
the number of attacks that the intrusion software can ever try, due to the danger
of being discovered, when it issues them from a particular (broken) network node.
The success of the attack scheme is characterized by two factors: the number of
nodes captured (the spread factor) and the number of virtual links that a defense
mechanism has to trace from any node where the attack is active to the origin of
the intrusion (the traceability factor). The goal of an intruder is to maximize both
factors. In our model we present four different ways (attack schemes) by which an
intruder can organize his attacks. Using analytic and experimental methods, we first
show that for any 0 < f < 1, there exists a constant g for which any of our attack
schemes can achieve a (n) spread and traceability factor with high probability,
given sufficient propagation time. We also show for three of our attack schemes
that the spread and the traceability factors are, with high probability, linearly related
during the whole duration of the attack propagation. This implies that it will not be
easy for a detection mechanism to trace the origin of the intrusion, since it will have
to trace a number of links proportional to the nodes captured.
Abstract: The problem of communication among mobile nodes is one of the most fundamental problems in ad hoc mobile networks and is at the core of many algorithms, such as for counting the number of nodes, electing a leader, data processing etc. For an exposition of several important problems in ad hoc mobile networks. The work of Chatzigiannakis, Nikoletseas and Spirakis focuses on wireless mobile networks that are subject to highly dynamic structural changes created by mobility, channel fluctuations and device failures. These changes affect topological connectivity, occur with high frequency and may not be predictable in advance. Therefore, the environment where the nodes move (in three-dimensional space with possible obstacles) as well as the motion that the nodes perform are \textit{input} to any distributed algorithm.
Abstract: Counting in general, and estimating the cardinality of (multi-) sets in particular, is highly desirable for a large variety of applications, representing a foundational block for the efficient deployment and access of emerging internet-scale information systems. Examples of such applications range from optimizing query access plans in internet-scale databases, to evaluating the significance (rank/score) of various data items in information retrieval applications. The key constraints that any acceptable solution must satisfy are: (i) efficiency: the number of nodes that need be contacted for counting purposes must be small in order to enjoy small latency and bandwidth requirements; (ii) scalability, seemingly contradicting the efficiency goal: arbitrarily large numbers of nodes nay need to add elements to a (multi-) set, which dictates the need for a highly distributed solution, avoiding server-based scalability, bottleneck, and availability problems; (iii) access and storage load balancing: counting and related overhead chores should be distributed fairly to the nodes of the network; (iv) accuracy: tunable, robust (in the presence of dynamics and failures) and highly accurate cardinality estimation; (v) simplicity and ease of integration: special, solution-specific indexing structures should be avoided. In this paper, first we contribute a highly-distributed, scalable, efficient, and accurate (multi-) set cardinality estimator. Subsequently, we show how to use our solution to build and maintain histograms, which have been a basic building block for query optimization for centralized databases, facilitating their porting into the realm of internet-scale data networks.
Abstract: We consider a synchronous distributed system with n processes that communicate through a dynamic network guaranteeing 1-interval connectivity i.e., the network topology graph might change at each interval while keeping the graph connected at any time. The processes belonging to the distributed system are identified through a set of labels L = {l1 , l2 . . . , lk } (with 1 ≤ k < n). In this challenging system model, the paper addresses the following problem: ”counting the number of processes with the same label”. We provide a distributed algorithm that is able solve the problem based on the notion of energy transfer. Each process owns a fixed energy charge, and tries to discharge itself exchanging, at each round, at most half of its charge with neighbors. The paper also discusses when such counting is possible in the presence of failures. Counting processes with the same label in dynamic networks with homonyms is of great importance because it is as difficult as computing generic aggregating functions.
Abstract: Wireless Sensor Networks consist of a large number of small, autonomous devices, that are able to interact with their inveronment by sensing and collaborate to fulfill their tasks, as, usually, a single node is incapable of doing so; and they use wireless communication to enable this collaboration. Each device has limited computational and energy resources, thus a basic issue in the applicastions of wireless sensor networks is the low energy consumption and hence, the maximization of the network lifetime.
The collected data is disseminated to a static control point – data sink in the network, using node to node - multi-hop data propagation. However, sensor devices consume significant amounts of energy in addition to increased implementation complexity, since a routing protocol is executed. Also, a point of failure emerges in the area near the control center where nodes relay the data from nodes that are farther away. Recently, a new approach has been developed that shifts the burden from the sensor nodes to the sink. The main idea is that the sink has significant and easily replenishable energy reserves and can move inside the area the sensor network is deployed, in order to acquire the data collected by the sensor nodes at very low energy cost. However, the need to visit all the regions of the network may result in large delivery delays.
In this work we have developed protocols that control the movement of the sink in wireless sensor networks with non-uniform deployment of the sensor nodes, in order to succeed an efficient (with respect to both energy and latency) data collection. More specifically, a graph formation phase is executed by the sink during the initialization: the network area is partitioned in equal square regions, where the sink, pauses for a certain amount of time, during the network traversal, in order to collect data.
We propose two network traversal methods, a deterministic and a random one. When the sink moves in a random manner, the selection of the next area to visit is done in a biased random manner depending on the frequency of visits of its neighbor areas. Thus, less frequently visited areas are favored. Moreover, our method locally determines the stop time needed to serve each region with respect to some global network resources, such as the initial energy reserves of the nodes and the density of the region, stopping for a greater time interval at regions with higher density, and hence more traffic load. In this way, we achieve accelerated coverage of the network as well as fairness in the service time of each region.Besides randomized mobility, we also propose an optimized deterministic trajectory without visit overlaps, including direct (one-hop) sensor-to-sink data transmissions only.
We evaluate our methods via simulation, in diverse network settings and comparatively to related state of the art solutions. Our findings demonstrate significant latency and energy consumption improvements, compared to previous research.
Abstract: We study here the problem of determining the majority type in an arbitrary connected network, each vertex of which has initially two possible types. The vertices may have a few additional possible states and can interact in pairs only if they share an edge. Any (population) protocol is required to stabilize in the initial majority. We first present and analyze a protocol with 4 states per vertex that always computes the initial majority value, under any fair scheduler. As we prove, this protocol is optimal, in the sense that there is no population protocol that always computes majority with fewer than 4 states per vertex. However this does not rule out the existence of a protocol with 3 states per vertex that is correct with high probability. To this end, we examine a very natural majority protocol with 3 states per vertex, introduced in [Angluin et al. 2008] where its performance has been analyzed for the clique graph. We study the performance of this protocol in arbitrary networks. We prove that, when the two initial states are put uniformly at random on the vertices, this protocol converges to the initial majority with probability higher than the probability of converging to the initial minority. In contrast, we present an infinite family of graphs, on which the protocol can fail whp, even when the difference between the initial majority and the initial minority is n−Θ(lnn). We also present another infinite family of graphs in which the protocol of Angluin et al. takes an expected exponential time to converge. These two negative results build upon a very positive result concerning the robustness of the protocol on the clique. Surprisingly, the resistance of the clique to failure causes the failure in general graphs. Our techniques use new domination and coupling arguments for suitably defined processes whose dynamics capture the antagonism between the states involved.
Abstract: Wireless sensor networks are comprised of a vast number of ultra-small fully autonomous computing, communication and sensing devices, with very restricted energy and computing capabilities, which co-operate to accomplish a large sensing task. Such networks can be very useful in practice in applications that require fine-grain monitoring of physical environment subjected to critical conditions (such as inaccessible terrains or disaster places). Very large numbers of sensor devices can be deployed in areas of interest and use self-organization and collaborative methods to form deeply networked environments. Features including the huge number of sensor devices involved, the severe power, computational and memory limitations, their dense deployment and frequent failures, pose new design and implementation aspects. The efficient and robust realization of such large, highly-dynamic, complex, non-conventional environments is a challenging algorithmic and technological task. In this work we consider certain important aspects of the design, deployment and operation of distributed algorithms for data propagation in wireless sensor networks and discuss some characteristic protocols, along with an evaluation of their performance.
Abstract: We propose a new data dissemination protocol for wireless sensor networks, that basically pulls some additional knowledge about the network in order to subsequently improve data forwarding towards the sink. This extra information is still local, limited and obtained in a distributed manner. This extra knowledge is acquired by only a small fraction of sensors thus the extra energy cost only marginally affects the overall protocol efficiency. The new protocol has low latency and manages to propagate data successfully even in the case of low densities. Furthermore, we study in detail the effect of failures and show that our protocol is very robust. In particular, we implement and evaluate the protocol using large scale simulation, showing that it significantly outperforms well known relevant solutions in the state of the art.
Abstract: We describe the design and implementation of secure and robust protocol and system for a national electronic lottery. Electronic lotteries at a national level are a viable cost effective alternative to mechanical ones when there is a business need to support many types of rdquogames of chancerdquo and to allow increased drawing frequency. Electronic lotteries are, in fact, extremely high risk financial application: If one discovers a way to predict or otherwise claim the winning numbers (even once) the result is huge financial damages. Moreover, the e-lottery process is complex, which increases the possibility of fraud or costly accidental failures. In addition, a national lottery must adhere to auditability and (regulatory) fairness requirements regarding its drawings. Our mechanism, which we believe is the first one of its kind to be described in the literature, builds upon a number of cryptographic primitives that ensure the unpredictability of the winning numbers, the prevention of their premature leakages and prevention of fraud. We also provide measures for auditability, fairness, and trustworthiness of the process. Besides cryptography, we incorporate security mechanisms that eliminate various risks along the entire process. Our system which was commissioned by a national organization, was implemented in the field and has been operational and active for a while, now.
Abstract: Core optical networks using reconfigurable optical
switches and tunable lasers appear to be on the road towards
widespread deployment and could evolve to all-optical mesh
networks in the coming future. Considering the impact of physical
layer impairments in the planning and operation of all-optical
(and translucent) networks is the main focus of the DICONET
project. The impairment aware network planning and operation
tool (NPOT) is the main outcome of DICONET project, which
is explained in detail in this paper. The key building blocks of
the NPOT, consisting of network description repositories, the
physical layer performance evaluator, the impairment aware
routing and wavelength assignment engines, the component
placement modules, failure handling and the integration of
NPOT in the control plane are the main contributions of this
work. Besides, the experimental result of DICONET proposal for
centralized and distributed control plane integration schemes and
the performance of the failure handling in terms of restoration
time is presented in this work.
Abstract: We propose a new data dissemination protocol for wireless sensor networks, that basically pulls some additional knowledge about the network in order to subsequently improve data forwarding towards the sink. This extra information is still local, limited and obtained in a distributed manner. This extra knowledge is acquired by only a small fraction of sensors thus the extra energy cost only marginally affects the overall protocol efficiency. The new protocol has low latency and manages to propagate data successfully even in the case of low densities. Furthermore, we study in detail the effect of failures and show that our protocol is very robust. In particular, we implement and evaluate the protocol using large scale simulation, showing that it significantly outperforms well known relevant solutions in the state of the art.
Abstract: Web services are becoming an important enabler of the Semantic Web. Besides the need for a rich description mechanism, Web Service information should be made available in an accessible way for machine processing. In this paper, we propose a new P2P basedapproach for Web Services discovery. Peers that store Web Services information, such as data item descriptions, are efficiently located using a scalable and robust data indexing structure for Peer-to-Peer data networks, NIPPERS. We present a theoretical analysis which shows that the communication cost of the query and update operations scale double-logarithmically with the number of NIPPERS nodes. Furthermore, we show that the network is robust with respect to failures fulfilling quality of web services requirements.
Abstract: The sensor devices are battery powered thus energy is the most precious resource of a wireless sensor
network since periodically replacing the battery of the nodes in large scale deployments is infeasible. The
collected data is disseminated to a static control point { data sink in the network, using node to node
{ multi-hop data propagation, [4, 6]. However, sensor devices consume signi cant amounts of energy in
addition to increased implementation complexity since a routing protocol is executed. Also, a point of
failure emerges in the area near the control center where nodes relay the data from nodes that are farther
away
Abstract: Geographic routing is becoming the protocol of choice for
many sensor network applications. The current state of the art is unsatisfactory:
some algorithms are very efficient, however they require a
preliminary planarization of the communication graph. Planarization induces
overhead and is thus not realistic for some scenarios such as the
case of highly dynamic network topologies. On the other hand, georouting
algorithms which do not rely on planarization have fairly low success
rates and fail to route messages around all but the simplest obstacles.
To overcome these limitations, we propose the GRIC geographic routing
algorithm. It has absolutely no topology maintenance overhead, almost
100% delivery rates (when no obstacles are added), bypasses large convex
obstacles, finds short paths to the destination, resists link failure
and is fairly simple to implement. The case of hard concave obstacles
is also studied; such obstacles are hard instances for which performance
diminishes.
Abstract: In this work we present a new simulation toolkit that we call TRAILS (Toolkit for Realism and Adaptivity In Large-scale Simulations), which extends the \NS simulator by adding several important functionalities and optimizing certain
critical simulator operations. The added features focus on providing the user with the necessary tools to better study wireless networks of high dynamics; in particular, to implement advanced mobility patterns, obstacle presence and disaster scenarios, and failures injection. These scenarios and patterns can dynamically change throughout the execution of the simulation based on network related parameters. Moreover, we define a set of utilities that can facilitate the use of \NS providing advanced statistics and easy-to-use logging mechanisms. This functionality is implemented in a simple and flexible architecture, that follows design patterns, object oriented and generic programming principles, maintaining a proper balance between reusability, extendability and ease of use. We evaluate the performance of TRAILS and show that it offers significant speed-ups (at least 4 times faster) regarding the execution time of \NS in certain important, common wireless settings. Our results also show that this is achieved with minimum overhead in terms of memory usage.
