Abstract: In this paper, we present a new hybrid opticalburst switch architecture (HOBS) that takes advantage of the pre-transmission idle
time during lightpath establishment. In dynamic circuit switching (wavelength routing) networks, capacity is immediately hardreserved
upon the arrival of a setup message at a node, but it is used at least a round-trip time delay later. This waste of resources
is significant in optical multi-gigabit networks and can be used to transmit traffic of a lower class of service in a non-competing
way. The proposed hybrid OBS architecture, takes advantage of this idle time to transmit one-way opticalbursts of a lower class of
service, while high priority data explicitly requests and establishes end-to-end lightpaths. In the proposed scheme, the two control
planes (two-way and one-way OBS reservation) are merged, in the sense that each SETUP message, used for the two-way lightpath
establishment, is associated with one-way burst transmission and therefore it is modified to carry routing and overhead information
for the one-way traffic as well. In this paper, we present the main architectural features of the proposed hybrid scheme and further
we assess its performance by conducting simulation experiments on the NSF net backbone topology. The extensive network study
revealed that the proposed hybrid architecture can achieve and sustain an adequate burst transmission rate with a finite worst case
delay.
Abstract: This paper presents an overview of Quality of Service (QoS) differentiation mechanisms proposed for OpticalBurstSwitching (OBS) networks. OBS has been proposed to couple the benefits of both circuit and packet switching for the “on demand” use of capacity in the future optical Internet. In such a case, QoS support imposes some important challenges before this technology is deployed. This paper takes a broader view on QoS, including QoS differentiation not only at the burst but also at the transport levels for OBS networks. A classification of existing QoS differentiation mechanisms for OBS is given and their efficiency and complexity are comparatively discussed. We provide numerical examples on how QoS differentiation with respect to burst loss rate and transport layer throughput can be achieved in OBS networks.
Abstract: We present an almost all-optical node
architecture suitable for on-the-fly packet and burstswitching without losses. The operation of the node is based
on wavelength converters for mapping the incoming to the
outgoing links, and for intra-node contention resolution. The
node can be built out of commercially available equipment,
and is easily scalable, with respect to the number of its
incoming and outgoing links, by simple addition of
components.
Abstract: In this paper we present the efficient burst reservation protocol (EBRP) suitable
for bufferless opticalburstswitching (OBS) networks. The EBRP protocol is a
two-way reservation scheme that employs timed and in-advance reservation of
resources. In the EBRP protocol timed reservations are relaxed, introducing a
reservation time duration parameter that is negotiated during call setup phase.
This feature allows bursts to reserve resources beyond their actual size to
increase their successful forwarding probability and can be used to provide
quality-of-service (QoS) differentiation. The EBRP protocol is suitable for
OBS networks and can guarantee a low blocking probability for bursts that can
tolerate the round-trip delay associated with the two-way reservation.We present
the main features of the proposed protocol and describe in detail the timing
considerations regarding the call setup phase and the actual reservation process.
Furthermore, we show evaluation results and compare the EBRP performance
against two other typical reservation schemes, a tell-and-wait and a tell-and-go
(just-enough-time) like protocol. EBRP has been developed for the control plane
of the IST-LASAGNE project.
Abstract: We present an architecture for implementing optical
buffers, based on the feed-forward-buffer concept, that can truly
emulate input queuing and accommodate asynchronous packet
and burst operation. The architecture uses wavelength converters
and fixed-length delay lines that are combined to form either a
multiple-input buffer or a shared buffer. Both architectures are
modular, allowing the expansion of the buffer at a cost that grows
logarithmically with the buffer depth, where the cost is measured
in terms of the number of switching elements, and wavelength
converters are employed. The architectural design also provides
a tradeoff between the number of wavelength converters and their
tunability. The buffer architectures proposed are complemented
with scheduling algorithms that can guarantee lossless communication
and are evaluated using physical-layer simulations to
obtain their performance in terms of bit-error rate and achievable
buffer size.
Abstract: We present an architecture for implementing optical
buffers, based on the feed-forward-buffer concept, that can truly
emulate input queuing and accommodate asynchronous packet
and burst operation. The architecture uses wavelength converters
and fixed-length delay lines that are combined to form either a
multiple-input buffer or a shared buffer. Both architectures are
modular, allowing the expansion of the buffer at a cost that grows
logarithmically with the buffer depth, where the cost is measured
in terms of the number of switching elements, and wavelength
converters are employed. The architectural design also provides
a tradeoff between the number of wavelength converters and their
tunability. The buffer architectures proposed are complemented
with scheduling algorithms that can guarantee lossless communication
and are evaluated using physical-layer simulations to
obtain their performance in terms of bit-error rate and achievable
buffer size.
Abstract: Switching in core optical networks is currently being
performed using high-speed electronic or all-optical
circuit switches. Switching with high-speed electronics
requires optical-to-electronic (O/E) conversion of the
data stream, making the switch a potential bottleneck
of the network: any effort (including parallelization) for
electronics to approach the optical speeds seems to be
already reaching its practical limits. Furthermore, the
store-and-forward approach of packet-switching does
not seem suitable for all-optical implementation due to
the lack of practical optical random-access-memories
to buffer and resolve contentions. Circuit switching on
the other hand, involves a pre-transmission delay for
call setup and requires the aggregation of microlows
into circuits, sacriicing the granularity and the control
over individual lows, and is ineficient for bursty traf-
ic. Opticalburstswitching (OBS) has been proposed
by Qiao and Yoo (1999) to combine the advantages of
both packet and circuit switching and is considered a
promising technology for the next generation optical
internet.
Abstract: In this paper, we demonstrate optical transparency
in packet formatting and network traffic offered by all-opticalswitching devices. Exploiting the bitwise processing capabilities
of these “optical transistors,” simple optical circuits are designed
verifying the independency to packet length, synchronization
and packet-to-packet power fluctuations. Devices with these attributes
are key elements for achieving network flexibility, fine
granularity and efficient bandwidth-on-demand use. To this end, a
header/payload separation circuit operating with IP-like packets,
a clock and data recovery circuit handling asynchronous packets
and a burst-mode receiver for bursty traffic are presented. These
network subsystems can find application in future high capacity
data-centric photonic packet switched networks.
Abstract: In this paper we present a signaling protocol for
QoS differentiation suitable for opticalburstswitching networks.
The proposed protocol is a two-way reservation scheme that
employs delayed and in-advance reservation of resources. In this
scheme delayed reservations may be relaxed, introducing a
reservation duration parameter that is negotiated during call
setup phase. This feature allows bursts to reserve resources
beyond their actual size to increase their successful forwarding
probability and is used to provide QoS differentiation. The
proposed signaling protocol offers a low blocking probability for
bursts that can tolerate the round-trip delay required for the
reservations. We present the main features of the protocol and
describe in detail timing considerations regarding the call setup
and the reservation process. We also describe several methods
for choosing the protocol parameters so as to optimize
performance and present corresponding evaluation results.
Furthermore, we compare the performance of the proposed
protocol against that of two other typical reservation protocols, a
Tell-and-Wait and a Tell-and-Go protocol.
Abstract: This paper presents a summary of OpticalBurstSwitching (OBS) research within the VI framework program e-Photon/ONe network of excellence. The paper includes network aspects such as routing techniques, resilience and contention resolution, together with burst switch architectures. On the other hand, we also discuss traffic analysis issues, Quality of Service (QoS) schemes, TCP/IP over OBS and physical layer aspects for OBS.
Abstract: This paper presents a summary of OpticalBurstSwitching (OBS) research within the VI framework program e-Photon/ONe
network of excellence. The paper includes network aspects such as routing techniques, resilience and contention resolution, together
with burst switch architectures. On the other hand, we also discuss traffic analysis issues, Quality of Service (QoS) schemes, TCP/IP
over OBS and physical layer aspects for OBS.
Abstract: Digital optical logic circuits capable of performing bit-wise signal processing are critical building blocks for the realization of future high-speed packet-switched networks. In this paper, we present recent advances in all-optical processing circuits and examine the potential of their integration into a system environment. On this concept, we demonstrate serial all-optical Boolean AND/XOR logic at 20 Gb/s and a novel all-optical packet clock recovery circuit, with low capturing time, suitable for burst-mode traffic. The circuits use the semiconductor-based ultrafast nonlinear interferometer (UNI) as the nonlinear switching element. We also present the integration of these circuits in a more complex unit that performs header and payload separation from short synchronous data packets at 10 Gb/s. Finally, we discuss a method to realize a novel packet scheduling switch architecture, which guarantees lossless communication for specific traffic burstiness constraints, using these logic units.