Abstract: We demonstrate a 40 Gb/s self-synchronizing, all-optical packet
clock recovery circuit designed for efficient packet-mode traffic. The circuit
locks instantaneously and enables sub-nanosecond packet spacing due to the
low clock persistence time. A low-Q Fabry-Perot filter is used as a passive
resonator tuned to the line-rate that generates a retimed clock-resembling
signal. As a reshaping element, an optical power-limiting gate is
incorporated to perform bitwise pulse equalization. Using two preamble
bits, the clock is captured instantly and persists for the duration of the data
packet increased by 16 bits. The performance of the circuit suggests its
suitability for future all-optical packet-switched networks with reduced
transmission overhead and fine network granularity.
Abstract: We design and implement a multicost impairment- aware routing and wavelength assignment algorithm for online traffic. In transparent optical networks the quality of a transmission degrades due to physical layer impairments. To serve a connection, the proposed algorithm finds a path and a free wavelength (a lightpath) that has acceptable signal quality performance by estimating a quality of transmission measure, called the Q factor. We take into account channel utilization in the network, which changes as new connections are established or released, in order to calculate the noise variances that correspond to physical impairments on the links. These, along with the time invariant eye impairment penalties of all candidate network paths, form the inputs to the algorithm. The multicost algorithm finds a set of so called non-dominated Q paths from the given source to the given destination. Various objective functions are then evaluated in order to choose the optimal lightpath to serve the connection. The proposed algorithm combines the strength of multicost optimization with low execution time, making it appropriate for serving online connections.
Abstract: Smart Dust is a special case of wireless sensor networks, comprised of a vast number of ultra-small fully autonomous computing, communication and sensing devices, with very restricted energy and computing capabilities, that co-operate to accomplish a large sensing task. Smart Dust can be very useful in practice, i.e. in the local detection of remote crucial events and the propagation of data reporting their realization to a control center.
In this paper, we propose a new energy efficient and fault tolerant protocol for data propagation in smart dust networks, the Variable Transmission Range Protocol (VTRP). The basic idea of data propagation in VTRP is the varying range of data transmissions, i.e. we allow the transmission range to increase in various ways. Thus, data propagation in our protocol exhibits high fault-tolerance (by bypassing obstacles or faulty sensors) and increases network lifetime (since critical sensors, i.e. close to the control center are not overused). As far as we know, it is the first time varying transmission range is used.
We implement the protocol and perform an extensive experimental evaluation and comparison to a representative protocol (LTP) of several important performance measures with a focus on energy consumption. Our findings indeed demonstrate that our protocol achieves significant improvements in energy efficiency and network lifetime.
Abstract: In this work we propose a new energy efficient and fault tolerant protocol for data propagation in wireless sensor networks, the Variable Transmission Range Protocol VTRP. The basic idea of data propagation in VTRP is the varying range of data transmissions, ie. we allow the transmission range to increase in various ways. Thus data propagation in our protocol exhibits high fault-tolerance (by bypassing obstacles or faulty sensors) and increases network lifetime (since critical sensors, ie. close to the control center are not overused). As far as we know, it is the first time varying transmission range is used.
We implement the protocol and perform an extensive experimental evaluation and comparison to a representative protocol (LTP) of several important performance measures with a focus on energy consumption. Our findings indeed demonstrate that our protocol achieves significant improvements in energy efficiency and network lifetime.
Abstract: In this paper, we present a new hybrid optical burst switch architecture (HOBS) that takes advantage of the pre-transmission idle
time during lightpath establishment. In dynamic circuit switching (wavelength routing) networks, capacity is immediately hardreserved
upon the arrival of a setup message at a node, but it is used at least a round-trip time delay later. This waste of resources
is significant in optical multi-gigabit networks and can be used to transmit traffic of a lower class of service in a non-competing
way. The proposed hybrid OBS architecture, takes advantage of this idle time to transmit one-way optical bursts of a lower class of
service, while high priority data explicitly requests and establishes end-to-end lightpaths. In the proposed scheme, the two control
planes (two-way and one-way OBS reservation) are merged, in the sense that each SETUP message, used for the two-way lightpath
establishment, is associated with one-way burst transmission and therefore it is modified to carry routing and overhead information
for the one-way traffic as well. In this paper, we present the main architectural features of the proposed hybrid scheme and further
we assess its performance by conducting simulation experiments on the NSF net backbone topology. The extensive network study
revealed that the proposed hybrid architecture can achieve and sustain an adequate burst transmission rate with a finite worst case
delay.
Abstract: Data propagation in wireless sensor networks can be performed either by hop-by-hop single transmissions or by multi-path broadcast of data. Although several energy-aware MAC layer protocols exist that operate very well in the case of single point-to-point transmissions, none is especially designed and suitable for multiple broadcast transmissions. The key idea of our protocols is the passive monitoring of local network conditions and the adaptation of the protocol operation accordingly. The main contribution of our adaptive method is to proactively avoid collisions by implicitly and early enough sensing the need for collision avoidance. Using the above ideas, we design, implement and evaluate three different, new strategies for proactive adaptation. We show, through a detailed and extended simulation evaluation, that our parameter-based family of protocols for multi-path data propagation significantly reduce the number of collisions and thus increase the rate of successful message delivery (to above 90%) by achieving satisfactory trade-offs with the average propagation delay. At the same time, our protocols are shown to be very energy efficient, in terms of the average energy dissipation per delivered message.
Abstract: We consider sensor networks where the sensor nodes are attached on entities that move in a highly dynamic, heterogeneous manner. To capture this mobility diversity we introduce a new network parameter, the direction-aware mobility
level, which measures how fast and close each mobile node is expected to get to the data destination (the sink). We then provide local, distributed data dissemination protocols
that adaptively exploit the node mobility to improve performance. In particular, "high" mobility is used as a low cost replacement for data dissemination (due to the ferrying of data), while in the case of "low" mobility either a) data propagation redundancy is increased (when highly mobile neighbors exist) or b) long-distance data transmissions are used (when the entire neighborhood is of low mobility) to accelerate data dissemination towards the sink. An extensive performance comparison to relevant methods from
the state of the art demonstrates signicant improvements i.e. latency is reduced by even 4 times while keeping energy dissipation and delivery success at very satisfactory levels.
Abstract: We study the problem of maintaining connectivity in a wireless
network where the network nodes are equipped with
directional antennas. Nodes correspond to points on the
plane and each uses a directional antenna modeled by a sector
with a given angle and radius. The connectivity problem
is to decide whether or not it is possible to orient the antennas
so that the directed graph induced by the node transmissions
is strongly connected. We present algorithms for
simple polynomial-time-solvable cases of the problem, show
that the problem is NP-complete in the 2-dimensional case
when the sector angle is small, and present algorithms that
approximate the minimum radius to achieve connectivity for
sectors with a given angle. We also discuss several extensions
to related problems. To the best of our knowledge, the
problem has not been studied before in the literature.
Abstract: Wireless Sensor Networks consist of a large number of small, autonomous devices, that are able to interact with their inveronment by sensing and collaborate to fulfill their tasks, as, usually, a single node is incapable of doing so; and they use wireless communication to enable this collaboration. Each device has limited computational and energy resources, thus a basic issue in the applicastions of wireless sensor networks is the low energy consumption and hence, the maximization of the network lifetime.
The collected data is disseminated to a static control point – data sink in the network, using node to node - multi-hop data propagation. However, sensor devices consume significant amounts of energy in addition to increased implementation complexity, since a routing protocol is executed. Also, a point of failure emerges in the area near the control center where nodes relay the data from nodes that are farther away. Recently, a new approach has been developed that shifts the burden from the sensor nodes to the sink. The main idea is that the sink has significant and easily replenishable energy reserves and can move inside the area the sensor network is deployed, in order to acquire the data collected by the sensor nodes at very low energy cost. However, the need to visit all the regions of the network may result in large delivery delays.
In this work we have developed protocols that control the movement of the sink in wireless sensor networks with non-uniform deployment of the sensor nodes, in order to succeed an efficient (with respect to both energy and latency) data collection. More specifically, a graph formation phase is executed by the sink during the initialization: the network area is partitioned in equal square regions, where the sink, pauses for a certain amount of time, during the network traversal, in order to collect data.
We propose two network traversal methods, a deterministic and a random one. When the sink moves in a random manner, the selection of the next area to visit is done in a biased random manner depending on the frequency of visits of its neighbor areas. Thus, less frequently visited areas are favored. Moreover, our method locally determines the stop time needed to serve each region with respect to some global network resources, such as the initial energy reserves of the nodes and the density of the region, stopping for a greater time interval at regions with higher density, and hence more traffic load. In this way, we achieve accelerated coverage of the network as well as fairness in the service time of each region.Besides randomized mobility, we also propose an optimized deterministic trajectory without visit overlaps, including direct (one-hop) sensor-to-sink data transmissions only.
We evaluate our methods via simulation, in diverse network settings and comparatively to related state of the art solutions. Our findings demonstrate significant latency and energy consumption improvements, compared to previous research.
Abstract: Through recent technology advances in the eld of wireless energy transmission, Wireless Rechargeable Sensor Networks
(WRSN) have emerged. In this new paradigm for
WSNs a mobile entity called Mobile Charger (MC) traverses
the network and replenishes the dissipated energy of sensors.
In this work we rst provide a formal denition of the charging
dispatch decision problem and prove its computational
hardness. We then investigate how to optimize the tradeo
s of several critical aspects of the charging process such
as a) the trajectory of the charger, b) the dierent charging
policies and c) the impact of the ratio of the energy
the MC may deliver to the sensors over the total available
energy in the network. In the light of these optimizations,
we then study the impact of the charging process to the
network lifetime for three characteristic underlying routing
protocols; a greedy protocol, a clustering protocol and an
energy balancing protocol. Finally, we propose a Mobile
Charging Protocol that locally adapts the circular trajectory
of the MC to the energy dissipation rate of each sub-region
of the network. We compare this protocol against several
MC trajectories for all three routing families by a detailed
experimental evaluation. The derived ndings demonstrate
signicant performance gains, both with respect to the no
charger case as well as the dierent charging alternatives; in
particular, the performance improvements include the network
lifetime, as well as connectivity, coverage and energy
balance properties.
Abstract: We study the problem of energy-balanced data propagation
in wireless sensor networks. The energy balance property
guarantees that the average per sensor energy dissipation
is the same for all sensors in the network, during
the entire execution of the data propagation protocol. This
property is important since it prolongs the network˘s lifetime
by avoiding early energy depletion of sensors.
We propose a new algorithm that in each step decides
whether to propagate data one-hop towards the final destination
(the sink), or to send data directly to the sink. This
randomized choice balances the (cheap) one-hop transimssions
with the direct transimissions to the sink, which are
more expensive but “bypass” the sensors lying close to the
sink. Note that, in most protocols, these close to the sink
sensors tend to be overused and die out early.
By a detailed analysis we precisely estimate the probabilities
for each propagation choice in order to guarantee
energy balance. The needed estimation can easily be performed
by current sensors using simple to obtain information.
Under some assumptions, we also derive a closed form
for these probabilities.
The fact (shown by our analysis) that direct (expensive)
transmissions to the sink are needed only rarely, shows that
our protocol, besides energy-balanced, is also energy efficient.
Abstract: We study the problem of energy-balanced data propagation in wireless sensor networks. The energy balance property guarantees that the average per sensor energy dissipation is the same for all sensors in the network, during the entire execution of the data propagation protocol. This property is important since it prolongs the network˘:s lifetime by avoiding early energy depletion of sensors.
We propose a new algorithm that in each step decides whether to propagate data one-hop towards the final destination (the sink), or to send data directly to the sink. This randomized choice balances the (cheap) one-hop transimssions with the direct transimissions to the sink, which are more expensive but “bypass” the sensors lying close to the sink. Note that, in most protocols, these close to the sink sensors tend to be overused and die out early.
By a detailed analysis we precisely estimate the probabilities for each propagation choice in order to guarantee energy balance. The needed estimation can easily be performed by current sensors using simple to obtain information. Under some assumptions, we also derive a closed form for these probabilities.
The fact (shown by our analysis) that direct (expensive) transmissions to the sink are needed only rarely, shows that our protocol, besides energy-balanced, is also energy efficient.
Abstract: In this work we study energy efficient routing strategies
for wireless ad-hoc networks. In this kind of networks,
energy is a scarce resource and its conservation
and efficient use is a major issue. Our strategy follows
the multi-cost routing approach, according to which a
cost vector of various parameters is assigned to each
link. The parameters of interest are the number of hops
on a path, and the residual energy and the transmission
power of the nodes on the path. These parameters
are combined in various optimization functions,
corresponding to different routing algorithms, for selecting
the optimal path. We evaluate the routing algorithms
proposed in a number of scenarios, with respect
to energy consumption, throughput and other performance
parameters of interest. From the experiments
conducted we conclude that routing algorithms that take
into account energy related parameters, increase the
lifetime of the network, while achieving better performance
than other approaches, such as minimum hop
routing.
Abstract: In this work, we propose an energy-efficient multicasting algorithm
for wireless networks for the case where the transmission
powers of the nodes are fixed. Our algorithm is
based on the multicost approach and selects an optimal
energy-efficient set of nodes for multicasting, taking into account:
i) the node residual energies, ii) the transmission
powers used by the nodes, and iii) the set of nodes covered.
Our algorithm is optimal, in the sense that it can
optimize any desired function of the total power consumed
by the multicasting task and the minimum of the current
residual energies of the nodes, provided that the optimization
function is monotonic in each of these parameters. Our
optimal algorithm has non-polynomial complexity, thus, we
propose a relaxation producing a near-optimal solution in
polynomial time. The performance results obtained show
that the proposed algorithms outperform established solutions
for energy-aware multicasting, with respect to both
energy consumption and network lifetime. Moreover, it is
shown that the near-optimal multicost algorithm obtains
most of the performance benefits of the optimal multicost
algorithm at a smaller computational overhead.
Abstract: We consider the online impairment-aware routing
and wavelength assignment (IA-RWA) problem in transparent
WDM networks. To serve a new connection, the online algorithm,
in addition to finding a route and a free wavelength (a lightpath),
has to guarantee its transmission quality, which is affected by
physical-layer impairments. Due to interference effects, the establishment
of the new lightpath affects and is affected by the other
lightpaths. We present two multicost algorithms that account
for the actual current interference among lightpaths, as well as
for other physical effects, performing a cross-layer optimization
between the network and physical layers. In multicost routing,
a vector of cost parameters is assigned to each link, from which
the cost vectors of the paths are calculated. The first algorithm
utilizes cost vectors consisting of impairment-generating source
parameters, so as to be generic and applicable to different physical
settings. These parameters are combined into a scalar cost
that indirectly evaluates the quality of candidate lightpaths. The
second algorithm uses specific physical-layer models to define
noise variance-related cost parameters, so as to directly calculate
the -factor of candidate lightpaths. The algorithms find a set of
so-called nondominated paths to serve the connection in the sense
that no path is better in the set with respect to all cost parameters.
To select the lightpath, we propose various optimization functions
that correspond to different IA-RWA algorithms. The proposed
algorithms combine the strength of multicost optimization with
low execution times, making them appropriate for serving online
connections
Abstract: In this paper we present a multicost algorithm for the joint
time scheduling of the communication and computation
resources that will be used by a task. The proposed
algorithm selects the computation resource to execute the
task, determines the path to route the input data, and finds
the starting times for the data transmission and the task
execution, performing advance reservations. We initially
present an optimal scheme of non-polynomial complexity
and by appropriately pruning the set of candidate paths we
also give a heuristic algorithm of polynomial complexity. We
evaluate the performance of our algorithm and compare it to
that of algorithms that handle only the computation or
communication part of the problem separately. We show that
in a Grid network where the tasks are CPU- and dataintensive
important performance benefits can be obtained by
jointly optimizing the use of the communication and
computation resources.
Abstract: In this work we study the combination of multicost
routing and adjustable transmission power in wireless
ad hoc networks, so as to obtain dynamic energy- and
interference-efficient routes to optimize network performance.
In multi-cost routing, a vector of cost parameters is
assigned to each network link, from which the cost vectors
of candidate paths are calculated. Only at the end these
parameters are combined in various optimization functions,
corresponding to different routing algorithms, for selecting
the optimal path. The multi-cost routing problem is a
generalization of the multi-constrained problem, where no
constraints exist, and is also significantly more powerful
than single-cost routing. Since energy is an important
limitation of wireless communications, the cost parameters
considered are the number of hops, the interference caused,
the residual energy and the transmission power of the
nodes on the path; other parameters could also be included,
as desired. We assume that nodes can use power control to
adjust their transmission power to the desired level. The
experiments conducted show that the combination of multicost
routing and adjustable transmission power can lead to
reduced interference and energy consumption, improving
network performance and lifetime.
Abstract: In this paper we propose an energy-aware broadcast algorithm for wireless networks. Our algorithm is based on the multicost approach and selects the set of nodes that by transmitting implement broadcasting in an optimally energy-efficient way. The energy-related parameters taken into account are the node transmission power and the node residual energy. The algorithm{\^a}€™s complexity however is non-polynomial, and therefore, we propose a relaxation producing a near-optimal solution in polynomial time. We also consider a distributed information exchange scheme that can be coupled with the proposed algorithms and examine the overhead introduced by this integration. Using simulations we show that the proposed algorithms outperform other solutions in the literature in terms of energy efficiency. Moreover, it is shown that the near-optimal algorithm obtains most of the performance benefits of the optimal algorithm at a smaller computational overhead.
Abstract: A key problem in Grid networks is how to efficiently manage the available infrastructure, in order to
satisfy user requirements and maximize resource utilization. This is in large part influenced by the
algorithms responsible for the routing of data and the scheduling of tasks. In this paper,wepresent several
multi-cost algorithms for the joint scheduling of the communication and computation resources that
will be used by a Grid task. We propose a multi-cost scheme of polynomial complexity that performs
immediate reservations and selects the computation resource to execute the task and determines the
path to route the input data. Furthermore, we introduce multi-cost algorithms that perform advance
reservations and thus also find the starting times for the data transmission and the task execution. We
initially present an optimal scheme of non-polynomial complexity and by appropriately pruning the set
of candidate paths we also give a heuristic algorithm of polynomial complexity. Our performance results
indicate that in a Grid network in which tasks are either CPU- or data-intensive (or both), it is beneficial
for the scheduling algorithm to jointly consider the computational and communication problems. A
comparison between immediate and advance reservation schemes shows the trade-offs with respect to
task blocking probability, end-to-end delay and the complexity of the algorithms.
Abstract: In this work we study the combination of
multicost routing and adjustable transmission power
in wireless ad-hoc networks, so as to obtain dynamic
energy and interference-efficient routes to optimize network performance. In multi-cost routing, a vector of
cost parameters is assigned to each network link, from
which the cost vectors of candidate paths are calcu-
lated. Only at the end are these parameters combined in
various optimization functions, corresponding to different routing algorithms, for selecting the optimal path.
The multi-cost routing problem is a generalization of
the multi-constrained problem, where no constraints exist, and is also significantly more powerful than single-
cost routing. Since energy is an important limitation of
wireless communications, the cost parameters consid
ered are the number of hops, the interference caused,
the residual energy and the transmission power of the
nodes on the path; other parameters could also be in
cluded, as desired.We assume that nodes can use power
control to adjust their transmission power to the desired
level. The experiments conducted show that the com
bination of multi-cost routing and adjustable transmis sion power can lead to reduced interference and energy
consumption, improving network performance and life-
time.
Abstract: We consider the offline version of the routing and
wavelength assignment (RWA) problem in transparent all-optical
networks. In such networks and in the absence of regenerators,
the signal quality of transmission degrades due to physical layer
impairments. Because of certain physical effects, routing choices
made for one lightpath affect and are affected by the choices made
for the other lightpaths. This interference among the lightpaths
is particularly difficult to formulate in an offline algorithm since,
in this version of the problem, we start without any established
connections and the utilization of lightpaths are the variables of
the problem.We initially present an algorithm for solving the pure
(without impairments) RWA problem based on a LP-relaxation
formulation that tends to yield integer solutions. Then, we extend
this algorithm and present two impairment-aware (IA) RWA algorithms
that account for the interference among lightpaths in their
formulation. The first algorithm takes the physical layer indirectly
into account by limiting the impairment-generating sources. The
second algorithm uses noise variance-related parameters to directly
account for the most important physical impairments. The
objective of the resulting cross-layer optimization problem is not
only to serve the connections using a small number of wavelengths
(network layer objective), but also to select lightpaths that have
acceptable quality of transmission (physical layer objective).
Simulations experiments using realistic network, physical layer,
and traffic parameters indicate that the proposed algorithms can
solve real problems within acceptable time.
Abstract: We investigate the problem of how to achieve energy balanced data propagation in distributed wireless sensor networks. The energy balance property guarantees that the average per sensor energy dissipation is the same for all sensors in the network, throughout the execution of the data propagation protocol. This property is crucial for prolonging the network lifetime, by avoiding early energy depletion of sensors.
We survey representative solutions from the state of the art. We first present a basic algorithm that in each step probabilistically decides whether to propagate data one-hop towards the final destination (the sink), or to send it directly to the sink. This randomized choice trades-off the (cheap, but slow) one-hop transmissions with the direct transmissions to the sink, which are more expensive but bypass the bottleneck region around the sink and propagate data fast. By a detailed analysis using properties of stochastic processes and recurrence relations we precisely estimate (even in closed form) the probability for each propagation option necessary for energy balance.
The fact (shown by our analysis) that direct (expensive) transmissions to the sink are needed only rarely, shows that our protocol, besides energy balanced, is also energy efficient. We then enhance this basic result by surveying some recent findings including a generalized algorithm and demonstrating the optimality of this two-way probabilistic data propagation, as well as providing formal proofs of the energy optimality of the energy balance property.
Abstract: We propose and evaluate an impairment-aware multi-parametric routing and wavelength assignment algorithm for online traffic in transparent optical networks. In such networks the signal quality of transmission degrades due to physical layer impairments. In the multiparametric approach, a vector of cost parameters is assigned to each link, from which the cost vectors of candidate lightpaths are calculated. In the proposed scheme the cost vector includes impairment generating source parameters, such as the path length, the number of hops, the number of crosstalk sources and other inter-lightpath interfering parameters, so as to indirectly account for the physical layer effects. For a requested connection the algorithm calculates a set of candidate lightpaths, whose quality of transmission is validated using a function that combines the impairment generating parameters. For selecting the lightpath we propose and evaluate various optimization functions that correspond to different IA-RWA algorithms. Our performance results indicate that the proposed algorithms utilize efficiently the available resources and minimize the total accumulated signal degradation on the selected lightpaths, while having low execution times.
Abstract: In this paper we propose an energy-efficient broadcast algorithm for wireless networks for the case where the transmission powers of the nodes are fixed. Our algorithm is based on the multicost approach and selects an optimal energy-efficient set of nodes for broadcasting, taking into account: i) the node residual energies, ii) the transmission powers used by the nodes, and iii) the set of nodes that are covered by a specific schedule. Our algorithm is optimal, in the sense that it can optimize any desired function of the total power consumed by the broadcasting task and the minimum of the current residual energies of the nodes, provided that the optimization function is monotonic in each of these parameters. Our algorithm has non-polynomial complexity, thus, we propose a relaxation producing a near-optimal solution in polynomial time. Using simulations we show that the proposed algorithms outperform other established solutions for energy-aware broadcasting with respect to both energy consumption and network lifetime. Moreover, it is shown that the near-optimal multicost algorithm obtains most of the performance benefits of the optimal multicost algorithm at a smaller computational overhead.
Abstract: We consider path protection in the routing and
wavelength assignment (RWA) problem for impairment
constrained WDM optical networks. The proposed multicost
RWA algorithms select the primary and the backup lightpaths by
accounting for physical layer impairments. The backup lightpath
may either be activated (1+1 protection) or it may be reserved and
not activated, with activation taking place when/if needed (1:1
protection). In case of 1:1 protection the period of time where the
quality of its transmission (QoT) is valid, despite the possible
establishment of future connections, should be preserved, so as to
be used in case the primary lightpath fails. We show that, by using
the multicost approach for solving the RWA with protection
problem, great benefits can be achieved both in terms of the
connection blocking rate and in terms of the validity period of the
backup lightpath. Moreover the multicost approach, by providing
a set of candidate lightpaths for each source destination pair,
instead of a single one, offers ease and flexibility in selecting the
primary and the backup lightpaths.
Abstract: In this paper we study the problem of assigning transmission ranges to the nodes of a multihop
packet radio network so as to minimize the total power consumed under the constraint
that adequate power is provided to the nodes to ensure that the network is strongly connected
(i.e., each node can communicate along some path in the network to every other node). Such
assignment of transmission ranges is called complete. We also consider the problem of achieving
strongly connected bounded diameter networks.
For the case of n + 1 colinear points at unit distance apart (the unit chain) we give a tight
asymptotic bound for the minimum cost of a range assignment of diameter h when h is a xed
constant and when h>(1 + ) log n, for some constant > 0. When the distances between the
colinear points are arbitrary, we give an O(n4) time dynamic programming algorithm for nding
a minimum cost complete range assignment.
For points in three dimensions we show that the problem of deciding whether a complete
range assignment of a given cost exists, is NP-hard. For the same problem we give an O(n2)
time approximation algorithm which provides a complete range assignment with cost within a
factor of two of the minimum. The complexity of this problem in two dimensions remains open,
while the approximation algorithm works in this case as well.
Abstract: Recent rapid technological developments have led to the
development of tiny, low-power, low-cost sensors. Such devices
integrate sensing, limited data processing and communication
capabilities.The effective distributed collaboration
of large numbers of such devices can lead to the efficient
accomplishment of large sensing tasks.
This talk focuses on several aspects of energy efficiency.
Two protocols for data propagation are studied: the first
creates probabilistically optimized redundant data transmissions
to combine energy efficiency with fault tolerance,
while the second guarantees (in a probabilistic way) the
same per sensor energy dissipation, towards balancing the
energy load and prolong the lifetime of the network.
A third protocol (in fact a power saving scheme) is also
presented, that directly and adaptively affects power dissipation
at each sensor. This “lower level” scheme can be
combined with data propagation protocols to further improve
energy efficiency.
Abstract: In this work we focus on the energy efficiency challenge in wireless sensor networks, from both an on-line perspective (related to routing), as well as a network design perspective (related to tracking). We investigate a few representative, important aspects of energy efficiency: a) the robust and fast data propagation b) the problem of balancing the energy
dissipation among all sensors in the network and c) the problem of efficiently tracking moving
entities in sensor networks. Our work here is a methodological survey of selected results that
have alre dy appeared in the related literature.
In particular, we investigate important issues of energy optimization, like minimizing the total
energy dissipation, minimizing the number of transmissions as well as balancing the energy
load to prolong the system˘s lifetime. We review characteristic protocols and techniques in the recent literature, including probabilistic forwarding and local optimization methods. We study the problem of localizing and tracking multiple moving targets from a network design perspective i.e. towards estimating the least possible number of sensors, their positions and operation characteristics needed to efficiently perform the tracking task. To avoid an expensive massive deployment, we try to take advantage of possible coverage overlaps over space and time, by introducing a novel combinatorial model that captures such overlaps. Under this model, we abstract the tracking network design problem by a covering combinatorial problem and then design and analyze an efficient approximate method for sensor placement
and operation.
Abstract: This research further investigates the recently introduced
(in [4]) paradigm of radiation awareness in ambient environments with abundant heterogeneous wireless networking
from a distributed computing perspective. We call radiation
at a point of a wireless network the total amount of electromagnetic quantity the point is exposed to; our denition incorporates the eect of topology as well as the time domain
and environment aspects. Even if the impact of radiation to
human health remains largely unexplored and controversial,
we believe it is worth trying to understand and control, in
a way that does not decrease much the quality of service
oered to users of the wireless network.
In particular, we here focus on the fundamental problem
of ecient data propagation in wireless sensor networks, try-
ing to keep latency low while maintaining at low levels the
radiation cumulated by wireless transmissions. We rst propose greedy and oblivious routing heuristics that are radiation aware. We then combine them with temporal back-o
schemes that use local properties of the network (e.g. number of neighbours, distance from sink) in order to spread" radiation in a spatio-temporal way. Our proposed radiation
aware routing heuristics succeed to keep radiation levels low,
while not increasing latency.
Abstract: A key problem in networks that support advance reservations is the routing and time scheduling of connections with flexible starting time and known data transfer size. In this paper we present a multicost routing and scheduling algorithm for selecting the path to be followed by such a connection and the time the data should start and end transmission at each link so as to minimize the reception time at the destination, or optimize some other performance criterion. The utilization profiles of the network links, the link propagation delays, and the parameters of the connection to be scheduled form the inputs to the algorithm. We initially present a scheme of non-polynomial complexity to compute a set of so called non-dominated candidate paths, from which the optimal path can be found. We then propose two mechanisms to appropriately prune the set of candidate paths in order to find multicost routing and scheduling algorithms of polynomial complexity. We examine the performance of the algorithms in the special case of an Optical Burst Switched network. Our results indicate that the proposed polynomial-time algorithms have performance that is very close to that of the optimal algorithm. We also study the effects network propagation delays and link-state update policies have on performance.
Abstract: A key problem in networks that support advance reservations is the routing and time scheduling of
connections with flexible starting time and known data transfer size. In this paper we present a multicost
routing and scheduling algorithm for selecting the path to be followed by such a connection and the time the
data should start and end transmission at each link so as to minimize the reception time at the destination,
or optimize some other performance criterion. The utilization profiles of the network links, the link
propagation delays, and the parameters of the connection to be scheduled form the inputs to the algorithm.
We initially present a scheme of non-polynomial complexity to compute a set of so-called non-dominated
candidate paths, from which the optimal path can be found. We then propose two mechanisms to
appropriately prune the set of candidate paths in order to find multicost routing and scheduling algorithms of
polynomial complexity. We examine the performance of the algorithms in the special case of an Optical
Burst Switched network. Our results indicate that the proposed polynomial time algorithms have performance that is very close to that of the optimal algorithm. We also study the effects network
propagation delays and link-state update policies have on performance.
Abstract: Orthogonal Frequency Division Multiplexing (OFDM)
has been recently proposed as a modulation technique for optical
networks, due to its good spectral efficiency and impairment
tolerance. Optical OFDM is much more flexible compared to
traditional WDM systems, enabling elastic bandwidth
transmissions. We consider the planning problem of an OFDMbased optical network where we are given a traffic matrix that
includes the requested transmission rates of the connections to be
served. Connections are provisioned for their requested rate by
elastically allocating spectrum using a variable number of OFDM
subcarriers. We introduce the Routing and Spectrum Allocation
(RSA) problem, as opposed to the typical Routing and
Wavelength Assignment (RWA) problem of traditional WDM
networks, and present various algorithms to solve the RSA. We
start by presenting an optimal ILP RSA algorithm that minimizes
the spectrum used to serve the traffic matrix, and also present a
decomposition method that breaks RSA into two substituent
subproblems, namely, (i) routing and (ii) spectrum allocation
(R+SA) and solves them sequentially. We also propose a heuristic
algorithm that serves connections one-by-one and use it to solve
the planning problem by sequentially serving all traffic matrix
connections. To feed the sequential algorithm, two ordering
policies are proposed; a simulated annealing meta-heuristic is also
proposed to obtain even better orderings. Our results indicate
that the proposed sequential heuristic with appropriate ordering
yields close to optimal solutions in low running times.
Abstract: We propose and evaluate the performance of a new MAC-layer protocol for mobile ad hoc networks, called the Slow Start Power Controlled (abbreviated SSPC) protocol. SSPC improves on IEEE 802.11 by using power control for the RTS/CTS and DATA frame transmissions, so as to reduce energy consumption and increase network throughput and lifetime. In our scheme the transmission power used for the RTS frames is not constant, but follows a slow start principle. The CTS frames, which are sent at maximum transmission power, prevent the neighbouring nodes from transmitting their DATA frames at power levels higher than a computed threshold, while allowing them to transmit at power levels less than that threshold. Reduced energy consumption is achieved by adjusting the node transmission power to the minimum required value for reliable reception at the receiving node, while increase in network throughput is achieved by allowing more transmissions to take place simultaneously. The slow start principle used for calculating the appropriate DATA frames transmission power and the possibility of more simultaneous collision-free transmissions differentiate the SSPC protocol from the other MAC solutions proposed for IEEE 802.11. Simulation results indicate that the SSPC protocol achieves a significant reduction in power consumption, average packet delay and frequency of RTS frame collisions, and a significant increase in network throughput and received-to-sent packets ratio compared to IEEE 802.11 protocol.
Abstract: In this paper, the impact of burstification delay on the TCP
traffic statistics is presented as well as a new assembly scheme that uses
flow window size as the threshold criterion. It is shown that short assembly
times are ideally suitable for sources with small congestion windows,
allowing for a speed up in their transmission. In addition, large assembly
times do not yield any throughput gain, despite the large number of
segments per burst transmitted, but result in a low throughput variation, and
thus a higher notion of fairness among the individual flows. To this end, in
this paper, we propose a new burst assembly scheme that dynamically
assigns flows to different assembly queues with different assembly timers,
based on their instant window size. Results show that the proposed scheme
with different timers provides a higher average throughput together with a
smaller variance which is a good compromise for bandwidth dimensioning.
Abstract: We examine the problem of transmitting in minimum time a given amount of data between a
source and a destination in a network with finite channel capacities and nonzero propagation delays. In
the absence of delays, the problem has been shown to be solvable in polynomial time. In this paper, we
show that the general problem is NP-complete. In addition, we examine transmissions along a single path,
called the quickest path, and present algorithms for general and special classes of networks that improve
upon previous approaches. The first dynamic algorithm for the quickest path problem is also
given
Abstract: Data propagation in wireless sensor networks can be performed either by hop-by-hop single transmissions or by multi-path broadcast of data. Although several energy-aware MAC layer protocols exist that operate very well in the case of single point-to-point transmissions, none is especially designed and suitable for multiple broadcast transmissions.In this paper we propose a family of new protocols suitable of multi-path broadcast of data, and show, through a detailed and extended simulation evaluation, that our parameter-based protocols significantly reduce the number of collisions and thus increase the rate of successful message delivery (to above 90%) by trading off the average propagation delay. At the same time, our protocols are shown to be very energy efficient, in terms of the average energy dissipation per delivered message.