Abstract: Load balancing/sharing is a policy which exploits the communication facility between the servers of a distributed system, by using the exchanging of status information and jobs between any two servers of the system, in order to improve the performance of the whole system. In this work, we propose a new adaptive distributed hierarchical scheme, the Virtual Tree Algorithm (VTA), which creates a virtual binary tree structure over the actual network topology. It uses the Difference-Initiated (DI) technique ([11, 1]) for load balancing/sharing, which needs remote information for the transfer policy, and no additional information for the location policy. We demonstrate here that the introduced virtual construction can keep the exchanged messages to a number favourable to those of the previously known efficient algorithms. To show the above statement and evaluate the performance of our policy, we make use of both analytical and simulation results. By using the simulation model that we developed, we compared our results with one of the most representative and new adaptive, symmetrical, distributed, and efficient algorithms, the Variable Threshold (V THR) algorithm
Abstract: As water supplies become scarce and polluted, there is an urgent
need to irrigate more efficiently in order to optimize water
use. In this paper, we present a WSN based, smart homeirrigation
system that consists of heterogeneous motes, special
sensors and actuators. The system is fully adaptive not
only to environmental conditions but also to the specific water
needs that different plants may have. This way, it manages
to perform efficient home irrigation, while it provides
an IPv6-capable managing system.
Abstract: We study the problem of fast and energy-efficient data collection of sensory data using a mobile sink, in wireless sensor networks in which both the sensors and the sink move. Motivated by relevant applications, we focus on dynamic sensory mobility and heterogeneous sensor placement. Our approach basically suggests to exploit the sensor motion to adaptively propagate information based on local conditions (such as high placement concentrations), so that the sink gradually “learns” the network and accordingly optimizes its motion. Compared to relevant solutions in the state of the art (such as the blind random walk, biased walks, and even optimized deterministic sink mobility), our method significantly reduces latency (the improvement ranges from 40% for uniform placements, to 800% for heterogeneous ones), while also improving the success rate and keeping the energy dissipation at very satisfactory levels.
Abstract: Motivated by emerging applications, we consider sensor networks where the sensors themselves (not just the sinks) are mobile. Furthermore, we focus on mobility scenarios characterized by heterogeneous, highly changing mobility roles in the network. To capture these high dynamics of diverse sensory motion we propose a novel network parameter,
the mobility level, which, although simple and local, quite accurately takes into account both the spatial and speed characteristics of motion. We then propose adaptive data dissemination protocols that use the mobility level estimation to optimize performance, by basically exploiting high mobility (redundant message ferrying) as a cost-effective replacement of flooding, e.g. the sensors tend to dynamically propagate less data in the presence
of high mobility, while nodes of high mobility are favored for moving data around. These dissemination schemes are enhanced by a distance-sensitive probabilistic message flooding inhibition mechanism that further reduces communication cost, especially for fast nodes of high mobility level, and as distance to data destination decreases. Our simulation findings
demonstrate significant performance gains of our protocols compared to non-adaptive protocols, i.e. adaptation increases the success rate and reduces latency (even by 15%) while at the same time significantly reducing energy dissipation (in most cases by even 40%). Also, our adaptive schemes achieve significantly higher message delivery ratio and
satisfactory energy-latency trade-offs when compared to flooding when sensor nodes have
limited message queues.
Abstract: We introduce a new modelling assumption for wireless sensor networks, that of node redeployment (addition of sensor devices during protocol evolution) and we extend the modelling assumption of heterogeneity (having sensor devices of various types). These two features further increase the highly dynamic nature of such networks and adaptation becomes a powerful technique for protocol design. Under these modelling assumptions, we design, implement and evaluate a new power conservation scheme for efficient data propagation. Our scheme is adaptive: it locally monitors the network conditions (density, energy) and accordingly adjusts the sleep-awake schedules of the nodes towards improved operation choices. The scheme is simple, distributed and does not require exchange of control messages between nodes.
Implementing our protocol in software we combine it with two well-known data propagation protocols and evaluate the achieved performance through a detailed simulation study using our extended version of the network simulator ns-2. We focus on highly dynamic scenarios with respect to network density, traffic conditions and sensor node resources. We propose a new general and parameterized metric capturing the trade-offs between delivery rate, energy efficiency and latency. The simulation findings demonstrate significant gains (such as more than doubling the success rate of the well-known Directed Diffusion propagation protocol) and good trade-offs achieved. Furthermore, the redeployment of additional sensors during network evolution and/or the heterogeneous deployment of sensors, drastically improve (when compared to ``equal total power" simultaneous deployment of identical sensors at the start) the protocol performance (i.e. the success rate increases up to four times} while reducing energy dissipation and, interestingly, keeping latency low).
Abstract: Wireless Sensor Networks are by nature highly dynamic and communication between sensors is completely ad hoc, especially when mobile devices are part of the setup. Numerous protocols and applications proposed for such networks
operate on the assumption that knowledge of the neighborhood is a priori available to all nodes. As a result, WSN deployments need to use or implement from scratch a neighborhood discovery mechanism. In this work we present a new protocol based on adaptive periodic beacon exchanges. We totally avoid continuous beaconing by adjusting the rate of broadcasts using the concept of consistency over the understanding of neighborhood that nearby devices share. We propose, implement and evaluate our adaptive neighborhood discovery protocol over our experimental testbed and using large scale simulations. Our results indicate that the
new protocol operates more eciently than existing reference implementations while it provides valid information to applications that use it. Extensive performance evaluation indicates that it successfully reduces generated network traffic by 90% and increases network lifetime by 20% compared to existing mechanisms that rely on continuous beaconing.
Abstract: Motivated by emerging applications, we consider sensor networks where the sensors themselves
(not just the sinks) are mobile. Furthermore, we focus on mobility
scenarios characterized by heterogeneous, highly changing mobility
roles in the network.
To capture these high dynamics of diverse sensory motion
we propose a novel network parameter, the mobility level, which, although
simple and local, quite accurately takes into account both the
spatial and speed characteristics of motion. We then propose
adaptive data dissemination protocols that use the
mobility level estimation to optimize performance, by basically
exploiting high mobility (redundant message ferrying) as a cost-effective
replacement of flooding, e.g., the sensors tend to dynamically propagate
less data in the presence of high mobility, while nodes of high mobility
are favored for moving data around.
These dissemination schemes are enhanced by a distance-sensitive
probabilistic message flooding inhibition mechanism that
further reduces communication cost, especially for fast nodes
of high mobility level, and as distance to data destination
decreases. Our simulation findings demonstrate significant
performance gains of our protocols compared to non-adaptive
protocols, i.e., adaptation increases the success rate and reduces
latency (even by 15\%) while at the same time significantly
reducing energy dissipation (in most cases by even 40\%).
Also, our adaptive schemes achieve significantly
higher message delivery ratio and satisfactory energy-latency
trade-offs when compared to flooding when sensor nodes have limited message queues.
Abstract: Motivated by emerging applications, we consider sensor networks where the sensors themselves
(not just the sinks) are mobile. We focus on mobility
scenarios characterized by heterogeneous, highly changing mobility
roles in the network.
To capture these high dynamics
we propose a novel network parameter, the mobility level, which, although
simple and local, quite accurately takes into account both the
spatial and speed characteristics of motion. We then propose
adaptive data dissemination protocols that use the
mobility level estimation to improve performance. By basically
exploiting high mobility (redundant message ferrying) as a cost-effective
replacement of flooding, e.g., the sensors tend to dynamically propagate
less data in the presence of high mobility, while nodes of high mobility
are favored for moving data around.
These dissemination schemes are enhanced by a distance-sensitive
probabilistic message flooding inhibition mechanism that
further reduces communication cost, especially for fast nodes
of high mobility level, and as distance to data destination
decreases. Our simulation findings demonstrate significant
performance gains of our protocols compared to non-adaptive
protocols, i.e., adaptation increases the success rate and reduces
latency (even by 15\%) while at the same time significantly
reducing energy dissipation (in most cases by even 40\%).
Also, our adaptive schemes achieve significantly
higher message delivery ratio and satisfactory energy-latency
trade-offs when compared to flooding when sensor nodes have limited message queues.
Abstract: Data propagation in wireless sensor networks can be performed either by hop-by-hop single transmissions or by multi-path broadcast of data. Although several energy-aware MAC layer protocols exist that operate very well in the case of single point-to-point transmissions, none is especially designed and suitable for multiple broadcast transmissions. The key idea of our protocols is the passive monitoring of local network conditions and the adaptation of the protocol operation accordingly. The main contribution of our adaptive method is to proactively avoid collisions by implicitly and early enough sensing the need for collision avoidance. Using the above ideas, we design, implement and evaluate three different, new strategies for proactive adaptation. We show, through a detailed and extended simulation evaluation, that our parameter-based family of protocols for multi-path data propagation significantly reduce the number of collisions and thus increase the rate of successful message delivery (to above 90%) by achieving satisfactory trade-offs with the average propagation delay. At the same time, our protocols are shown to be very energy efficient, in terms of the average energy dissipation per delivered message.
Abstract: We consider sensor networks where the sensor nodes are attached on entities that move in a highly dynamic, heterogeneous manner. To capture this mobility diversity we introduce a new network parameter, the direction-aware mobility
level, which measures how fast and close each mobile node is expected to get to the data destination (the sink). We then provide local, distributed data dissemination protocols
that adaptively exploit the node mobility to improve performance. In particular, "high" mobility is used as a low cost replacement for data dissemination (due to the ferrying of data), while in the case of "low" mobility either a) data propagation redundancy is increased (when highly mobile neighbors exist) or b) long-distance data transmissions are used (when the entire neighborhood is of low mobility) to accelerate data dissemination towards the sink. An extensive performance comparison to relevant methods from
the state of the art demonstrates signi cant improvements i.e. latency is reduced by even 4 times while keeping energy dissipation and delivery success at very satisfactory levels.
Abstract: We investigate the problem of ecient wireless energy recharging in Wireless Rechargeable Sensor Networks (WRSNs). In
such networks a special mobile entity (called the Mobile Charger) traverses the network and wirelessly replenishes the energy
of sensor nodes. In contrast to most current approaches, we envision methods that are distributed, adaptive and use limited
network information. We propose three new, alternative protocols for ecient recharging, addressing key issues which we
identify, most notably (i) to what extent each sensor should be recharged (ii) what is the best split of the total energy between
the charger and the sensors and (iii) what are good trajectories the MC should follow. One of our protocols (
LRP
) performs
some distributed, limited sampling of the network status, while another one (
RTP
) reactively adapts to energy shortage alerts
judiciously spread in the network. As detailed simulations demonstrate, both protocols signi cantly outperform known state
of the art methods, while their performance gets quite close to the performance of the global knowledge method (
GKP
) we
also provide, especially in heterogeneous network deployments.
Abstract: In this paper, we consider the problem of energy balanced data propagation in wireless sensor networks and we generalise previous works by allowing realistic energy assignment. A new modelisation of the process of energy consumption as a random walk along with a new analysis are proposed. Two new algorithms are presented and analysed. The first one is easy to implement and fast to execute. However, it needs a priori assumptions on the process generating data to be propagated. The second algorithm overcomes this need by inferring information from the observation of the process. Furthermore, this algorithm is based on stochastic estimation methods and is adaptive to environmental changes. This represents an important contribution for propagating energy balanced data in wireless sensor netwoks due to their highly dynamic nature.
Abstract: In this paper we study the problem of basic communication
in ad-hoc mobile networks where the deployment area changes in a
highly dynamic way and is unknown. We call such networks
highly changing ad-hoc mobile networks.
For such networks we investigate an efficient communication protocol which extends
the idea (introduced in [WAE01,POMC01]) of exploiting the co-ordinated
motion of a small part of an ad-hoc mobile
network (the ``runners support") to achieve
very fast communication between any two mobile users of the network.
The basic idea of the new protocol presented here is, instead
of using a fixed sized support for the whole duration of the protocol,
to employ a support of some initial (small) size which
adapts (given some time which can be made fast enough) to the
actual levels of traffic and the
(unknown and possibly rapidly changing) network area by
changing its size in order to converge to an optimal size,
thus satisfying certain Quality of Service criteria.
We provide here some proofs of correctness and fault tolerance
of this adaptive approach and we also provide analytical results
using Markov Chains and random walk techniques to show that such
an adaptive approach is, for this class of ad-hoc mobile networks, significantly more efficient than a simple non-adaptive
implementation of the basic ``runners support" idea.
Abstract: We introduce a new modelling assumption in wireless sensor networks, that of node redeployment (addition of sensor devices during the protocol evolution) and we extend the modelling assumption of heterogeneity (having sensor devices of various types). These two features further increase the highly dynamic nature of such networks and adaptation becomes a powerful technique for protocol design. Under this model, we design, implement and evaluate a power conservation scheme for efficient data propagation. Our protocol is adaptive: it locally monitors the network conditions (density, energy) and accordingly adjusts the sleep-awake schedules of the nodes towards best operation choices. Our protocol operates does not require exchange of control messages between nodes to coordinate.Implementing our protocol we combine it with two well-known data propagation protocols and evaluate the achieved performance through a detailed simulation study using our extended version of Ns2. We focus in highly dynamic scenarios with respect to network density, traffic conditions and sensor node resources. We propose a new general and parameterized metric capturing the trade-off between delivery rate, energy efficiency and latency. The simulation findings demonstrate significant gains (such as more than doubling the success rate of the well-known Directed Diffusion propagation paradigm) and good trade-offs. Furthermore, redeployment of sensors during network evolution and/or heterogeneous deployment of sensors drastically improve (when compared to equal total "power" simultaneous deployment of identical sensors at the start) the protocol performance (the success rate increases up to four times while reducing energy dissipation and, interestingly, keeping latency low).
Abstract: Collecting sensory data using a mobile data sink has
been shown to drastically reduce energy consumption at the cost of increasing delivery delay. Towards improved energy-latency trade-offs, we propose a biased, adaptive sink mobility scheme, that adjusts to local network conditions, such as the surrounding density, remaining energy and the number of past visits in each network region. The sink moves probabilistically, favoring less visited areas in order to cover the network area faster, while adaptively stopping more time in network regions that tend to produce more data. We implement and evaluate our mobility scheme via simulation in diverse network settings. Compared to known blind random, non-adaptive schemes, our method achieves
significantly reduced latency, especially in networks with nonuniform sensor distribution, without compromising the energy efficiency and delivery success.
Abstract: Collecting sensory data using a mobile data sink has been shown to drastically reduce energy consumption at the cost of increasing delivery delay. Towards improved energy-latency trade-offs, we propose a biased, adaptive sink mobility scheme, that adjusts to local network conditions, such as the surrounding density, remaining energy and the number of past visits in each network region. The sink moves probabilistically, favoring less visited areas in order to cover the network area faster, while adaptively stopping more time in network regions that tend to produce more data. We implement and evaluate our mobility scheme via simulation in diverse network settings. Compared to known blind random, non-adaptive schemes, our method achieves significantly reduced latency, especially in networks with nonuniform sensor distribution, without compromising the energy efficiency and delivery success.
Abstract: Collecting sensory data using a mobile data sink has
been shown to drastically reduce energy consumption at the cost of increasing delivery delay. Towards improved energy-latency trade-offs, we propose a biased, adaptive sink mobility scheme, that adjusts to local network conditions, such as the surrounding
density, remaining energy and the number of past visits in each network region. The sink moves probabilistically, favoring less visited areas in order to cover the network area faster, while adaptively stopping more time in network regions that tend to
produce more data. We implement and evaluate our mobility scheme via simulation in diverse network settings. Compared to known blind random, non-adaptive schemes, our method achieves
significantly reduced latency, especially in networks with nonuniform sensor distribution, without compromising the energy efficiency and delivery success.
Abstract: We study the problem of energy-balanced data propagation in wireless sensor networks. The energy balance property is crucial for maximizing the time the network is functional, by avoiding early energy depletion of a large portion of sensors. We propose a distributed, adaptive data propagation algorithm that exploits limited, local network density information for achieving energy-balance while at the same time
minimizing energy dissipation.
We investigate both uniform and heterogeneous sensor placement distributions. By a detailed experimental evaluation and comparison with well-known energy-balanced protocols, we show that our density-based protocol improves energy efficiency signi cantly while also having better energy balance properties.
Furthermore, we compare the performance of our protocol with a centralized, o -line optimum solution derived by a linear program which maximizes the network lifetime and show that it achieves near-optimal performance for uniform sensor deployments.
Abstract: Random walks in wireless sensor networks can serve as fully
local, very simple strategies for sink motion that reduce energy dissipa-
tion a lot but increase the latency of data collection. To achieve satis-
factory energy-latency trade-offs the sink walks can be made adaptive,
depending on network parameters such as density and/or history of past
visits in each network region; but this increases the memory require-
ments. Towards better balances of memory/performance, we propose two
new random walks: the Random Walk with Inertia and the Explore-and-
Go Random Walk; we also introduce a new metric (Proximity Varia-
tion) that captures the different way each walk gets close to the network
nodes. We implement the new walks and experimentally compare them
to known ones. The simulation findings demonstrate that the new walk˘s
performance (cover time) gets close to the one of the (much stronger)
biased walk, while in some other respects (partial cover time, proximity
variation) they even outperform it. We note that the proposed walks
have been fine-tuned in the light of experimental findings.
Abstract: In this work we introduce two practical and interesting models of ad-hoc mobile networks: (a) hierarchical ad-hoc networks, comprised of dense subnetworks of mobile users interconnected by a very fast yet limited backbone infrastructure, (b) highly changing ad-hoc networks, where the deployment area changes in a highly dynamic way and is unknown to the protocol. In such networks, we study the problem of basic communication, i.e., sending messages from a sender node to a receiver node. For highly changing networks, we investigate an efficient communication protocol exploiting the coordinated motion of a small part of an ad-hoc mobile network (the ldquorunners supportrdquo) to achieve fast communication. This protocol instead of using a fixed sized support for the whole duration of the protocol, employs a support of some initial (small) size which adapts (given some time which can be made fast enough) to the actual levels of traffic and the (unknown and possibly rapidly changing) network area, by changing its size in order to converge to an optimal size, thus satisfying certain Quality of Service criteria. Using random walks theory, we show that such an adaptive approach is, for this class of ad-hoc mobile networks, significantly more efficient than a simple non-adaptive implementation of the basic ldquorunners supportrdquo idea, introduced in [9,10]. For hierarchical ad-hoc networks, we establish communication by using a ldquorunnersrdquo support in each lower level of the hierarchy (i.e., in each dense subnetwork), while the fast backbone provides interconnections at the upper level (i.e., between the various subnetworks). We analyze the time efficiency of this hierarchical approach. This analysis indicates that the hierarchical implementation of the support approach significantly outperforms a simple implementation of it in hierarchical ad-hoc networks. Finally, we discuss a possible combination of the two approaches above (the hierarchical and the adaptive ones) that can be useful in ad-hoc networks that are both hierarchical and highly changing. Indeed, in such cases the hierarchical nature of these networks further supports the possibility of adaptation.
Abstract: Swarms of small devices, that bridge the physical with the digital domain and communicate with each other, have become essential parts of our daily activity, forming networks to support myriads of new and exciting applications. Technology requires such systems to be dependable and adaptive to the user needs, to sudden changes of the environment, and to specific applications characteristics.
Abstract: Top-k query processing is a fundamental building block for efficient ranking in a large number of applications. Efficiency is a central issue, especially for distributed settings, when the data is spread across different nodes in a network. This paper introduces novel optimization methods for top-k aggregation queries in such distributed environments. The optimizations can be applied to all algorithms that fall into the frameworks of the prior TPUT and KLEE methods. The optimizations address three degrees of freedom: 1) hierarchically grouping input lists into top-k operator trees and optimizing the tree structure, 2) computing data-adaptive scan depths for different input sources, and 3) data-adaptive sampling of a small subset of input sources in scenarios with hundreds or thousands of query-relevant network nodes. All optimizations are based on a statistical cost model that utilizes local synopses, e.g., in the form of histograms, efficiently computed convolutions, and estimators based on order statistics. The paper presents comprehensive experiments, with three different real-life datasets and using the ns-2 network simulator for a packet-level simulation of a large Internet-style network.
Abstract: The energy balance property (i.e., all nodes having the same energy throughout the network evolution) contributes significantly (along with energy efficiency) to the maximization of the network lifespan and network connectivity. The problem of achieving energy balanced propagation is well studied in static networks, as it has attracted a lot of research attention.
Recent technological advances have enabled sensor devices to be attached to mobile entities of our every day life (e.g. smart-phones, cars, PDAs etc), thus introducing the formation of highly mobile sensor networks.
Inspired by the aforementioned applications, this work is (to the best of our knowledge) the first studying the energy balance property in wireless networks where the nodes are highly and dynamically mobile. In particular, in this paper we propose a new diverse mobility model which is easily parameterized and we also present a new protocol which tries to adaptively exploit the inherent node mobility in order to achieve energy balance in the network in an efficient way.
Abstract: We study the problem of fast and energy-efficient
data collection of sensory data using a mobile sink, in wireless sensor networks in which both the sensors and the sink move. Motivated by relevant applications, we focus on dynamic sensory
mobility and heterogeneous sensor placement. Our approach basically suggests to exploit the sensor motion to adaptively propagate information based on local conditions (such as high placement concentrations), so that the sink gradually ”learns”
the network and accordingly optimizes its motion. Compared to relevant solutions in the state of the art (such as the blind random walk, biased walks, and even optimized deterministic sink mobility), our method significantly reduces latency (the improvement ranges from 40% for uniform placements, to 800% for heterogeneous ones), while also improving the success rate and keeping the energy dissipation at very satisfactory levels.
Abstract: This special issue of Computer Science Review features seven papers on foundations of adaptive networked societies of tiny artefacts. The introduction describes the motivation for the special issue and briefly
Abstract: We propose, implement and evaluate new energy conservation schemes for efficient data propagation in wireless sensor networks. Our protocols are adaptive, i.e. locally monitor the network conditions and accordingly adjust towards optimal operation choices. This dynamic feature is particularly beneficial in heterogeneous settings and in cases of redeployment of sensor devices in the network area. We implement our protocols and evaluate their performance through a detailed simulation study using our extended version of ns-2. In particular we combine our schemes with known communication paradigms. The simulation findings demonstrate significant gains and good trade-offs in terms of delivery success, delay and energy dissipation.
Abstract: Recent rapid technological developments have led to the
development of tiny, low-power, low-cost sensors. Such devices
integrate sensing, limited data processing and communication
capabilities.The effective distributed collaboration
of large numbers of such devices can lead to the efficient
accomplishment of large sensing tasks.
This talk focuses on several aspects of energy efficiency.
Two protocols for data propagation are studied: the first
creates probabilistically optimized redundant data transmissions
to combine energy efficiency with fault tolerance,
while the second guarantees (in a probabilistic way) the
same per sensor energy dissipation, towards balancing the
energy load and prolong the lifetime of the network.
A third protocol (in fact a power saving scheme) is also
presented, that directly and adaptively affects power dissipation
at each sensor. This “lower level” scheme can be
combined with data propagation protocols to further improve
energy efficiency.
Abstract: In this paper we present an efficient general simulation strategy for
computations designed for fully operational BSP machines of n ideal processors,
on n-processor dynamic-fault-prone BSP machines. The fault occurrences are failstop
and fully dynamic, i.e., they are allowed to happen on-line at any point of the
computation, subject to the constraint that the total number of faulty processors
may never exceed a known fraction. The computational paradigm can be exploited
for robust computations over virtual parallel settings with a volatile underlying
infrastructure, such as a NETWORK OF WORKSTATIONS (where workstations may be
taken out of the virtual parallel machine by their owner).
Our simulation strategy is Las Vegas (i.e., it may never fail, due to backtracking
operations to robustly stored instances of the computation, in case of locally
unrecoverable situations). It adopts an adaptive balancing scheme of the workload
among the currently live processors of the BSP machine.
Our strategy is efficient in the sense that, compared with an optimal off-line
adversarial computation under the same sequence of fault occurrences, it achieves an O
ˇ
.log n ˘ log log n/2˘
multiplicative factor times the optimal work (namely, this
measure is in the sense of the “competitive ratio” of on-line analysis). In addition,
our scheme is modular, integrated, and considers many implementation points.
We comment that, to our knowledge, no previous work on robust parallel computations
has considered fully dynamic faults in the BSP model, or in general distributed
memory systems. Furthermore, this is the first time an efficient Las Vegas
simulation in this area is achieved.
Abstract: In this work we tackle the open problem of self-join size (SJS) estimation in a large-scale distributed data system, where tuples of a relation are distributed over data nodes which comprise an overlay network. Our contributions include adaptations of five well-known SJS estimation centralized techniques (coined sequential, cross-sampling, adaptive, bifocal, and sample-count) to the network environment and a novel technique which is based on the use of the Gini coefficient. We develop analyses showing how Gini estimations can lead to estimations of the underlying Zipfian or power-law value distributions. We further contribute distributed sampling algorithms that can estimate accurately and efficiently the Gini coefficient. Finally, we provide detailed experimental evidence testifying for the claimed increased accuracy, precision, and efficiency of the proposed SJS estimation method, compared to the other methods. The proposed approach is the only one to ensure high efficiency, precision, and accuracy regardless of the skew of the underlying data.
Abstract: We consider the important problem of energy balanced data propagation in wireless sensor networks and we extend and generalize
previous works by allowing adaptive energy assignment. We consider the data gathering problem where data are generated by the sensors and
must be routed toward a unique sink. Sensors route data by either sending the data directly to the sink or in a multi-hop fashion by delivering
the data to a neighbouring sensor. Direct and neighbouring transmissions require different levels of energy consumption. Basically, the protocols balance the energy consumption among the sensors by computing the adequate ratios of direct and neighbouring transmissions. An abstract model of energy dissipation as a random walk is proposed, along with rigorous performance analysis techniques. Two efficient distributed algorithms are presented and analysed, by both rigorous means and simulation.
The first one is easy to implement and fast to execute. The protocol assumes that sensors know a-priori the rate of data they generate.
The sink collects and processes all these information in order to compute the relevant value of the protocol parameter. This value is transmitted
to the sensors which individually compute their optimal ratios of direct and neighbouring transmissions. The second protocol avoids the necessary a-priori knowledge of the data rate generated by sensors by inferring the relevant information from the observation of the data paths.
Furthermore, this algorithm is based on stochastic estimation methods and is adaptive to environmental changes.
