Abstract: We consider the problem of planning a mixed line
rates (MLR) wavelength division multiplexing (WDM) transport
optical network. In such networks, different modulation formats
are usually employed to support the transmission at different line
rates. Previously proposed planning algorithms, have used a
transmissionreach limit for each modulation format/line rate,
mainly driven by single line rate systems. However, transmission
experiments in MLR networks have shown that physical layer
interference phenomena are more significant between
transmissions that utilize different modulation formats. Thus, the
transmissionreach of a connection with a specific modulation
format/line rate depends also on the other connections that copropagate
with it in the network. To plan a MLR WDM network,
we present routing and wavelength assignment (RWA)
algorithms that take into account the adaptation of the
transmissionreach of each connection according to the use of the
modulation formats/line rates in the network. The proposed
algorithms are able to plan the network so as to alleviate
interference effects, enabling the establishment of connections of
acceptable quality over paths that would otherwise be prohibited
Abstract: In translucent (or managed reach) WDM optical
networks, regenerators are employed at specific nodes. Some of
the connections in such networks are routed transparently, while
others have to go through a sequence of 3R regenerators that serve
as “refueling stations” to restore their quality of transmission
(QoT). We extend an online multicost algorithm for transparent
networks presented in our previous study [1], to obtain an IA-RWA
algorithm that works in translucent networks and makes use,
when required, of the regenerators present at certain locations
of the network. To characterize a path, the algorithm uses a
multicost formulation with several cost parameters, including the
set of available wavelengths, the length of the path, the number of
regenerators used, and noise variance parameters that account for
the physical layer impairments. Given a new connection request
and the current utilization state of the network, the algorithm calculates
a set of non dominated candidate paths, meaning that any
path in this set is not inferior with respect to all cost parameters
than any other path. This set consists of all the cost-effective (in
terms of the domination relation) and feasible (in terms of QoT)
lightpaths for the given source-destination pair, including all the
possible combinations for the utilization of available regenerators
of the network. An optimization function or policy is then applied
to this set in order to select the optimal lightpath. Different optimization
policies correspond to different IA-RWA algorithms.
We propose and evaluate several optimization policies, such as the
most used wavelength, the best quality of transmission, the least
regeneration usage, or a combination of these rules. Our results
indicate that in a translucent network the employed IA-RWA
algorithm has to consider all problem parameters, namely, the
QoT of the lightpaths, the utilization of wavelengths and the
availability of regenerators, to efficiently serve the online traffic.
Abstract: Switching in core optical networks is currently being
performed using high-speed electronic or all-optical
circuit switches. Switching with high-speed electronics
requires optical-to-electronic (O/E) conversion of the
data stream, making the switch a potential bottleneck
of the network: any effort (including parallelization) for
electronics to approach the optical speeds seems to be
already reaching its practical limits. Furthermore, the
store-and-forward approach of packet-switching does
not seem suitable for all-optical implementation due to
the lack of practical optical random-access-memories
to buffer and resolve contentions. Circuit switching on
the other hand, involves a pre-transmission delay for
call setup and requires the aggregation of microlows
into circuits, sacriicing the granularity and the control
over individual lows, and is ineficient for bursty traf-
ic. Optical burst switching (OBS) has been proposed
by Qiao and Yoo (1999) to combine the advantages of
both packet and circuit switching and is considered a
promising technology for the next generation optical
internet.
Abstract: We consider the problem of planning a mixed line rates (MLR) WDM transport optical network. In a MLR network, the interference between different modulation format/line rate connections affect the transmissionreach of these connections. We present algorithms to plan a MLR network that take into account the variation of the transmissionreach according to the use of the modulation formats/line rates in the network.
Abstract: We consider the problem of planning a mixed line rate
(MLR) wavelength division multiplexing (WDM) transport
optical network. In such networks, different modulation formats
are usually employed to support transmission at different line
rates. Previously proposed planning algorithms have used a
transmissionreach bound for each modulation format/line rate,
mainly driven by single line rate systems. However, transmission
experiments in MLR networks have shown that physical layer
interference phenomena are more severe among transmissions
that utilize different modulation formats. Thus, the transmissionreach of a connection with a specific modulation format/line rate
depends also on the other connections that co-propagate with it
in the network. To plan a MLR WDM network, we present
routing and wavelength assignment (RWA) algorithms that
adapt the transmissionreach of each connection according to the
use of the modulation formats/line rates in the network. The
proposed algorithms are able to plan the network so as to
alleviate cross-rate interference effects, enabling the
establishment of connections of acceptable quality over paths that
would otherwise be prohibited.
