Abstract: In this paper, we present a new hybrid optical burst switch architecture (HOBS) that takes advantage of the pre-transmission idle
time during lightpath establishment. In dynamic circuit switching (wavelength routing) networks, capacity is immediately hardreserved
upon the arrival of a setup message at a node, but it is used at least a round-trip time delay later. This waste of resources
is significant in optical multi-gigabit networks and can be used to transmit traffic of a lower class of service in a non-competing
way. The proposed hybrid OBS architecture, takes advantage of this idle time to transmit one-way optical bursts of a lower class of
service, while high priority data explicitly requests and establishes end-to-end lightpaths. In the proposed scheme, the two control
planes (two-way and one-way OBS reservation) are merged, in the sense that each SETUP message, used for the two-way lightpath
establishment, is associated with one-way burst transmission and therefore it is modified to carry routing and overhead information
for the one-way traffic as well. In this paper, we present the main architectural features of the proposed hybrid scheme and further
we assess its performance by conducting simulation experiments on the NSF net backbone topology. The extensive network study
revealed that the proposed hybrid architecture can achieve and sustain an adequate burst transmission rate with a finite worst case
delay.
Abstract: This paper presents an overview of Quality of Service (QoS) differentiation mechanisms proposed for Optical Burst Switching (OBS) networks. OBS has been proposed to couple the benefits of both circuit and packet switching for the “on demand” use of capacity in the future optical Internet. In such a case, QoS support imposes some important challenges before this technology is deployed. This paper takes a broader view on QoS, including QoS differentiation not only at the burst but also at the transport levels for OBS networks. A classification of existing QoS differentiation mechanisms for OBS is given and their efficiency and complexity are comparatively discussed. We provide numerical examples on how QoS differentiation with respect to burst loss rate and transport layer throughput can be achieved in OBS networks.
Abstract: This paper reviews the work performed under the
European ESPRIT project DO_ALL (Digital OpticAL Logic
modules) spanning from advanced devices (semiconductor optical
amplifiers) to all-optical modules (laser sources and gates) and
from optical signal processing subsystems (packet clock recovery,
optical write/store memory, and linear feedback shift register) to
their integration in the application level for the demonstration of
nontrivial logic functionality (all-optical bit-error-rate tester and
a 2 2 exchange–bypass switch). The successful accomplishment
of the project¢s goals has opened the road for the implementation
of more complex ultra-high-speed all-optical signal processing
circuits that are key elements for the realization of all-optical
packet switching networks.
Abstract: In this paper, a novel configuration is proposed for
the implementation of an almost all-optical switch architecture
called the scheduling switch, which when combined with appropriate
wait-for-reservation or tell-and-go connection and flow
control protocols provides lossless communication for traffic
that satisfies certain smoothness properties. An all-optical 2 2
exchange/bypass (E/B) switch based on the nonlinear operation
of a semiconductor optical amplifier (SOA) is considered as the
basic building block of the scheduling switch as opposed to active
SOA-based space switches that use injection current to switch
between ON and OFF states. The experimental demonstration of
the optically addressable 2 2 E/B, which is summarized for
10–Gb/s data packets as well as synchronous digital hierarchy
(SDH)/STM-64 data frames, ensures the feasibility of the proposed
configuration at high speeds, with low switching energy and low
losses during the scheduling process. In addition, it provides
reduction of the number of required components for the construction
of the scheduling switch, which is calculated to be 50% in the
number of active elements and 33% in the fiber length.
Abstract: We present an almost all-optical node
architecture suitable for on-the-fly packet and burst
switching without losses. The operation of the node is based
on wavelength converters for mapping the incoming to the
outgoing links, and for intra-node contention resolution. The
node can be built out of commercially available equipment,
and is easily scalable, with respect to the number of its
incoming and outgoing links, by simple addition of
components.
Abstract: We present a 40 Gb/s asynchronous self-routing network and node architecture that exploits bit
and packet level optical signal processing to perform synchronization, forwarding and
switching. Optical packets are self-routed on a hop-by-hop basis through the network by using
stacked optical tags, each representing a specific optical node. Each tag contains control signals
for configuring the switching matrix and forwarding each packet to the appropriate outgoing
link and onto the next hop. Physical layer simulations are performed, modeling each optical subsystem
of the node showing acceptable signal quality and Bit Error Rates. Resource reservationbased
signaling algorithms are theoretically modeled for the control plane capable of providing
high performance in terms of blocking probability and holding time.
Abstract: In this article, we present a detailed performance
evaluation of a hybrid opticalswitching (HOS)
architecture called Overspill Routing in Optical Networks
(ORION). The ORION architecture combines
(optical) wavelength and (electronic) packet switching,
so as to obtain the individual advantages of both switching
paradigms. In particular, ORION exploits the possible insertions/extractions, to reduce the necessary
interfaces, do not deteriorate performance and thus the
use of traffic concentrators assure ORION’s economic
viability.
idle periods of established lightpaths to transmit
packets destined to the next common node, or even
directly to their common end-destination. Depending
on whether all lightpaths are allowed to simultaneously
carry and terminate overspill traffic or overspill is restricted
to a sub-set of wavelengths, the architecture
limits itself to constrained or un-constrained ORION. To
evaluate both cases, we developed an extensive network
simulator where the basic features of the ORION architectureweremodeled,
including suitable edge/core node
switches and load-varying sources to simulate overloading
traffic conditions. Further, we have assessed various
aspects of the ORION architecture including two
basic routing/forwarding policies and various buffering
schemes. The complete network study shows that
ORION can absorb temporal traffic overloads, as intended,
provided sufficient buffering is present.We also
demonstrate that the restriction of simultaneous packet
Abstract: All-optical gate control signal generation is demonstrated
from flag pulses, using a Fabry–P{\'e}rot filter followed by
a semiconductor optical amplifier. Ten control pulses are generated
from a single flag pulse having less than 0.45-dB amplitude
modulation. By doubling or tripling the number of flag pulses, the
number of control pulses increases approximately by a factor of
two or three. The circuit can control the switching state of all-optical
switches, on a packet-by-packet basis, and can be used for
nontrivial network functionalities such us self-routing.
Abstract: In this paper we present the efficient burst reservation protocol (EBRP) suitable
for bufferless optical burst switching (OBS) networks. The EBRP protocol is a
two-way reservation scheme that employs timed and in-advance reservation of
resources. In the EBRP protocol timed reservations are relaxed, introducing a
reservation time duration parameter that is negotiated during call setup phase.
This feature allows bursts to reserve resources beyond their actual size to
increase their successful forwarding probability and can be used to provide
quality-of-service (QoS) differentiation. The EBRP protocol is suitable for
OBS networks and can guarantee a low blocking probability for bursts that can
tolerate the round-trip delay associated with the two-way reservation.We present
the main features of the proposed protocol and describe in detail the timing
considerations regarding the call setup phase and the actual reservation process.
Furthermore, we show evaluation results and compare the EBRP performance
against two other typical reservation schemes, a tell-and-wait and a tell-and-go
(just-enough-time) like protocol. EBRP has been developed for the control plane
of the IST-LASAGNE project.
Abstract: We present an architecture for implementing optical
buffers, based on the feed-forward-buffer concept, that can truly
emulate input queuing and accommodate asynchronous packet
and burst operation. The architecture uses wavelength converters
and fixed-length delay lines that are combined to form either a
multiple-input buffer or a shared buffer. Both architectures are
modular, allowing the expansion of the buffer at a cost that grows
logarithmically with the buffer depth, where the cost is measured
in terms of the number of switching elements, and wavelength
converters are employed. The architectural design also provides
a tradeoff between the number of wavelength converters and their
tunability. The buffer architectures proposed are complemented
with scheduling algorithms that can guarantee lossless communication
and are evaluated using physical-layer simulations to
obtain their performance in terms of bit-error rate and achievable
buffer size.
Abstract: We present an architecture for implementing optical
buffers, based on the feed-forward-buffer concept, that can truly
emulate input queuing and accommodate asynchronous packet
and burst operation. The architecture uses wavelength converters
and fixed-length delay lines that are combined to form either a
multiple-input buffer or a shared buffer. Both architectures are
modular, allowing the expansion of the buffer at a cost that grows
logarithmically with the buffer depth, where the cost is measured
in terms of the number of switching elements, and wavelength
converters are employed. The architectural design also provides
a tradeoff between the number of wavelength converters and their
tunability. The buffer architectures proposed are complemented
with scheduling algorithms that can guarantee lossless communication
and are evaluated using physical-layer simulations to
obtain their performance in terms of bit-error rate and achievable
buffer size.
Abstract: In this paper we discussed different switch architectures. We focus mainly on optical buffering. We investigate an all-optical buffer architecture comprising of cascaded stages of quantum-dot semiconductor optical amplifier- based tunable wavelength converters, at 160 Gb/s. We also propose the optical buffer with multi-wavelength converters based on quantum-dot semiconductor optical amplifiers. We present multistage switching fabrics with optical buffers, where optical buffers are based on fibre delay lines and are located in the first stage. Finally, we describe a photonic asynchronous packet switch and show that the employment of a few optical buffer stages to complement the electronic ones significantly improves the switch performance. We also propose two asynchronous optical packet switching node architectures, where an efficient contention resolution is based on controllable optical buffers and tunable wavelength converters TWCs.
Abstract: Switching in core optical networks is currently being
performed using high-speed electronic or all-optical
circuit switches. Switching with high-speed electronics
requires optical-to-electronic (O/E) conversion of the
data stream, making the switch a potential bottleneck
of the network: any effort (including parallelization) for
electronics to approach the optical speeds seems to be
already reaching its practical limits. Furthermore, the
store-and-forward approach of packet-switching does
not seem suitable for all-optical implementation due to
the lack of practical optical random-access-memories
to buffer and resolve contentions. Circuit switching on
the other hand, involves a pre-transmission delay for
call setup and requires the aggregation of microlows
into circuits, sacriicing the granularity and the control
over individual lows, and is ineficient for bursty traf-
ic. Optical burst switching (OBS) has been proposed
by Qiao and Yoo (1999) to combine the advantages of
both packet and circuit switching and is considered a
promising technology for the next generation optical
internet.
Abstract: The objective of this research is to propose two new optical procedures for packet routing and forwarding in the framework of transparent optical networks. The single-wavelength label-recognition and packet-forwarding unit, which represents the central physical constituent of the switching node, is fully described in both cases. The first architecture is a hybrid opto-electronic structure relying on an optical serial-to-parallel converter designed to slow down the label processing. The remaining switching operations are done electronically. The routing system remains transparent for the packet payloads. The second architecture is an all-optical architecture and is based on the implementation of all-optical decoding of the parallelized label. The packet-forwarding operations are done optically. The major subsystems required in both of the proposed architectures are described on the basis of nonlinear effects in semiconductor optical amplifiers. The experimental results are compatible with the integration of the whole architecture. Those subsystems are a 4-bit time-to-wavelength converter, a pulse extraction circuit, a an optical wavelength generator, a 3 x 8 all-optical decoder and a packet envelope detector.
Abstract: In this paper, we demonstrate optical transparency
in packet formatting and network traffic offered by all-opticalswitching devices. Exploiting the bitwise processing capabilities
of these “optical transistors,” simple optical circuits are designed
verifying the independency to packet length, synchronization
and packet-to-packet power fluctuations. Devices with these attributes
are key elements for achieving network flexibility, fine
granularity and efficient bandwidth-on-demand use. To this end, a
header/payload separation circuit operating with IP-like packets,
a clock and data recovery circuit handling asynchronous packets
and a burst-mode receiver for bursty traffic are presented. These
network subsystems can find application in future high capacity
data-centric photonic packet switched networks.
Abstract: We present a detailed performance evaluation of a
hybrid opticalswitching architecture called Overspill Routing in
Optical Networks (ORION). The ORION architecture combines
wavelength and (electronic) packet switching, so as to obtain the
advantages of both switching paradigms. We have developed an
extensive network simulator where the basic features of the
ORION architecture were modeled, including suitable loadvarying
sources and edge/core node architectures. Various aspects
of the ORION architecture were studied including the routing
policies used (i.e. once ORION always ORION and lightpath reentry)
and the various options available for the buffer
architecture. The complete network study shows that ORION can
absorb temporary traffic overloads, as intended, provided
sufficient buffering is present.
Abstract: This paper describes recent research activities and results in the area of photonic switching
carried out within the Virtual Department on Switching (VDS) of the European e-Photon/
ONe Network of Excellence. Contributions from outstanding European research groups in
this field are collected to offer a platform for future research in opticalswitching. The paper
contains the main topics related to network scenarios, switch architectures and experiments,
with an effort to investigate synergies and challenging opportunities for collaboration
and integration of research expertise in the field.
Abstract: This paper presents a theoretical and experimental
analysis of saturated semiconductor optical amplifier (SOA)-based
interferometric switching arrangements. For the first time, it is
shown that such devices can provide enhanced intensity modulation
reduction to return-to-zero (RZ) formatted input pulse trains,
when the SOA is saturated with a strong continuous-wave (CW)
input signal. A novel theoretical platform has been developed in
the frequency domain, which reveals that the intensity modulation
of the input pulse train can be suppressed by more than 10 dB at
the output. This stems from the presence of the strong CW signal
that transforms the sinusoidal transfer function of the interferometric
switch into an almost flat, strongly nonlinear curve. This
behavior has also been verified experimentally for both periodically
and randomly degraded, in terms of intensity modulation,
signals at 10 Gb/s using the ultrafast nonlinear interferometer as
the switching device. Performance analysis both in the time and
frequency domains is demonstrated, verifying the concept and its
theoretical analysis.
Abstract: In this paper we present a signaling protocol for
QoS differentiation suitable for optical burst switching networks.
The proposed protocol is a two-way reservation scheme that
employs delayed and in-advance reservation of resources. In this
scheme delayed reservations may be relaxed, introducing a
reservation duration parameter that is negotiated during call
setup phase. This feature allows bursts to reserve resources
beyond their actual size to increase their successful forwarding
probability and is used to provide QoS differentiation. The
proposed signaling protocol offers a low blocking probability for
bursts that can tolerate the round-trip delay required for the
reservations. We present the main features of the protocol and
describe in detail timing considerations regarding the call setup
and the reservation process. We also describe several methods
for choosing the protocol parameters so as to optimize
performance and present corresponding evaluation results.
Furthermore, we compare the performance of the proposed
protocol against that of two other typical reservation protocols, a
Tell-and-Wait and a Tell-and-Go protocol.
Abstract: This paper presents a summary of Optical Burst Switching (OBS) research within the VI framework program e-Photon/ONe network of excellence. The paper includes network aspects such as routing techniques, resilience and contention resolution, together with burst switch architectures. On the other hand, we also discuss traffic analysis issues, Quality of Service (QoS) schemes, TCP/IP over OBS and physical layer aspects for OBS.
Abstract: This paper presents a summary of Optical Burst Switching (OBS) research within the VI framework program e-Photon/ONe
network of excellence. The paper includes network aspects such as routing techniques, resilience and contention resolution, together
with burst switch architectures. On the other hand, we also discuss traffic analysis issues, Quality of Service (QoS) schemes, TCP/IP
over OBS and physical layer aspects for OBS.
Abstract: Digital optical logic circuits capable of performing bit-wise signal processing are critical building blocks for the realization of future high-speed packet-switched networks. In this paper, we present recent advances in all-optical processing circuits and examine the potential of their integration into a system environment. On this concept, we demonstrate serial all-optical Boolean AND/XOR logic at 20 Gb/s and a novel all-optical packet clock recovery circuit, with low capturing time, suitable for burst-mode traffic. The circuits use the semiconductor-based ultrafast nonlinear interferometer (UNI) as the nonlinear switching element. We also present the integration of these circuits in a more complex unit that performs header and payload separation from short synchronous data packets at 10 Gb/s. Finally, we discuss a method to realize a novel packet scheduling switch architecture, which guarantees lossless communication for specific traffic burstiness constraints, using these logic units.
Abstract: In this paper, we review recent advances in ultrafast optical time-domain technology with emphasis on the use in optical packet switching. In this respect, several key building blocks, including high-rate laser sources applicable to any time-division-multiplexing (TDM) application, optical logic circuits for bitwise processing, and clock-recovery circuits for timing synchronization with both synchronous and asynchronous data traffic, are described in detail. The circuits take advantage of the ultrafast nonlinear transfer function of semiconductor-based devices to operate successfully at rates beyond 10 Gb/s. We also demonstrate two more complex circuits-a header extraction unit and an exchange-bypass switch-operating at 10 Gb/s. These two units are key blocks for any general-purpose packet routing/switching application. Finally, we discuss the system perspective of all these modules and propose their possible incorporation in a packet switch architecture to provide low-level but high-speed functionalities. The goal is to perform as many operations as possible in the optical domain to increase node throughput and to alleviate the network from unwanted and expensive optical-electrical-optical conversions.